ความร้อนร่วมและโรงไฟฟ้าagriKomp GmbH
BGA/NGA168
ความร้อนร่วมและโรงไฟฟ้า
agriKomp GmbH
BGA/NGA168
ปีที่ผลิต
2024
สภาพ
ใหม่
ที่ตั้ง
Merkendorf 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- ความร้อนร่วมและโรงไฟฟ้า
- ผู้ผลิต:
- agriKomp GmbH
- รุ่น:
- BGA/NGA168
- ปีที่ผลิต:
- 2024
- สภาพ:
- ใหม่
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
- ที่ตั้ง:
- Energiepark 2, 91732 Merkendorf, DE
โทร
รายละเอียดทางเทคนิค
- กำลัง:
- 350 กิโลวัตต์ (475.87 แรงม้า)
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A16761621
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 09.09.2567
คำอธิบาย
Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA V 8-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains/parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 85°C / RL 70°C,
OPTIONAL: with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE).
TECHNICAL DATA
GENSET /CHP - Biogas 50% CH4
Electrical output at cos φ=1: 350 kWel
Electrical efficiency: 41.4 %
Thermal output motor at 180^exhaust gas temperature: 334 kWth
Dwodpfx Ajt Uu Ezehxec
Electricity coefficient el/th. : 1,05
Engine type V8
Displacement: 16 Ltr
Combustion thermal output - 100% load: 845kWel
Gas consumption at50%CH4: 169.1Nm³/h
Length x width x height m 4.1 x 1.5 x 2.1
Weight unfilled 4500kg
The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn.
All pipes are made of V2A and insulated where necessary.
To ensure that the motors are kept warm, the installed heat pumps are programmed to start up in a set cycle,
that they start up in a set cycle and thus enable the desired temperature to be maintained.
An automatic gas shut-off valve for installation outside the CHP installation room is not included in the scope of delivery.
The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11.
An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery.
The CHP unit is also optionally available in a container.
The entire unit is also available as a natural gas version.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
OPTIONAL: with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE).
TECHNICAL DATA
GENSET /CHP - Biogas 50% CH4
Electrical output at cos φ=1: 350 kWel
Electrical efficiency: 41.4 %
Thermal output motor at 180^exhaust gas temperature: 334 kWth
Dwodpfx Ajt Uu Ezehxec
Electricity coefficient el/th. : 1,05
Engine type V8
Displacement: 16 Ltr
Combustion thermal output - 100% load: 845kWel
Gas consumption at50%CH4: 169.1Nm³/h
Length x width x height m 4.1 x 1.5 x 2.1
Weight unfilled 4500kg
The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn.
All pipes are made of V2A and insulated where necessary.
To ensure that the motors are kept warm, the installed heat pumps are programmed to start up in a set cycle,
that they start up in a set cycle and thus enable the desired temperature to be maintained.
An automatic gas shut-off valve for installation outside the CHP installation room is not included in the scope of delivery.
The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11.
An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery.
The CHP unit is also optionally available in a container.
The entire unit is also available as a natural gas version.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2021
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 9826 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด