เครื่องฉีดพลาสติก Arburg ALLROUNDER 720 S 3200-1300Arburg
ALLROUNDER 720 S 3200-1300
เครื่องฉีดพลาสติก Arburg ALLROUNDER 720 S 3200-1300
Arburg
ALLROUNDER 720 S 3200-1300
ปีที่ผลิต
2016
สภาพ
ใช้แล้ว
ที่ตั้ง
เยอรมนี 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- เครื่องฉีดพลาสติก Arburg ALLROUNDER 720 S 3200-1300
- ผู้ผลิต:
- Arburg
- ปีที่ผลิต:
- 2016
- สภาพ:
- พร้อมใช้งาน (มือสอง)
- ชั่วโมงการทำงาน:
- 37,890 h
ราคาและสถานที่
- ที่ตั้ง:
- , เยอรมนี

โทร
รายละเอียดทางเทคนิค
แรงหนีบ:
3,200 กิโลนิวตัน
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23346005
- หมายเลขอ้างอิง:
- DE-INJ-ARB-2016-00009
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 17.11.2569
คำอธิบาย
Hydraulic injection moulding machine manufactured in 2016. This ARBURG ALLROUNDER 720 S 3200-1300 has a clamping force of 3,200 kN and a 55 mm screw diameter. It includes a SELOGICA direct control unit and an ARBURG MULTILIFT SELECT robot with a 15 kg payload. Consider the opportunity to buy this ARBURG ALLROUNDER 720 S 3200-1300 hydraulic injection moulding machine. Contact us for further details.
- Clamping Force: 3,200 kN (320 tonnes)- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor/Heating Rated Current: 125 / 70 A- Total Connected Load: 124 kW- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)- Screw Coupling: Reinforced spline geometry for high continuous dosing torques- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)- Platen / Centring: Central injection position, 160 mm centring diameter- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot - Robot Weight: 450 kg - Max. Handling Payload: 15 kg - Control Unit: SELOGICA - Pneumatic Operating Pressure: 0.
Iedpfx Aj Akr Izoi Njbd
- Clamping Force: 3,200 kN (320 tonnes)- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor/Heating Rated Current: 125 / 70 A- Total Connected Load: 124 kW- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)- Screw Coupling: Reinforced spline geometry for high continuous dosing torques- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)- Platen / Centring: Central injection position, 160 mm centring diameter- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot - Robot Weight: 450 kg - Max. Handling Payload: 15 kg - Control Unit: SELOGICA - Pneumatic Operating Pressure: 0.
Iedpfx Aj Akr Izoi Njbd
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด















