BIESSE Selco WNT 630BIESSE
Selco WNT 630
BIESSE Selco WNT 630
BIESSE
Selco WNT 630
ปีที่ผลิต
2022
สภาพ
ใช้แล้ว
ที่ตั้ง
โปแลนด์ 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- BIESSE Selco WNT 630
- ผู้ผลิต:
- BIESSE
- รุ่น:
- Selco WNT 630
- ปีที่ผลิต:
- 2022
- สภาพ:
- พร้อมใช้งาน (มือสอง)
ราคาและสถานที่
- ที่ตั้ง:
- , โปแลนด์

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A22550297
- หมายเลขอ้างอิง:
- PL-SAW-BIE-2022-00001
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 10.11.2569
คำอธิบาย
This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information.
• Maximum cutting length: 3,800 mm
• Maximum saw blade projection: 108 mm
• Maximum gripper opening: 100 mm
• Minimum panel size on the lift table: 1,830 × 915 mm
• Maximum panel size on the lift table: 3,660 × 2,200 mm
Iedszug E Hepfx Ap Iebd
• Maximum stack height: 630 mm
• Minimum loading thickness on the lift table: 10 mm
• Working table height: 985 mm
• Lift table load capacity: 5,000 kgMain saw and scoring unit
• Main saw motor: 18.5 kW (25 hp)
• Scoring saw motor: 2.2 kW (3 hp)
• Main saw blade: Ø 400 mm, 1 included
• Scoring saw blade: Ø 200 mm with trapezoidal teeth, 1 included
• Saw blade lift driven by a brushless motor and ball screw
• Pressure beam opening control
• DIGISET electronic alignment of the scoring blade with the main saw blade
• Scoring unit can be disabled from the control panel
• QUICK CHANGE system for both saw blades
• Saw carriage travel speed: 1–160 m/min, brushless drive
• Maximum pusher speed: 90 m/min, brushless drive
• Side alignment unit integrated into the saw carriage (0 mm + 3,500 mm as specified in the quotation)Loading and unloading equipment
• Rear loading onto the lift table with powered rollers and automatic stack positioning at the zero point
• Powered rollers on the lift table for side loading
• Right-side loading and unloading with continuous operator control
• Two panel-counting devices for automatic loading of thin calibrated panels from 2.5 mm thick
• Automatic detection of the bottom support panel based on the thickness set in the machine parameters
• Six liftable pneumatic grippers in the standard configuration
• Two additional liftable pneumatic grippers with double lower fingers for mounting on the pusher
• Two pusher contact points
• Two front alignment stops
• Eleven standard roller modules and two additional roller modules with wheels
• One 2,050 × 850 mm unloading table with non-powered rollers, replacing the standard 2,050 × 620 mm air flotation table
• Two additional rounded air flotation unloading tables, each 2,050 × 620 mm
• One fan serving up to six air flotation tablesControl, maintenance and safety
• Windows-based PC control with flat-panel monitor, keyboard and mouse
• OSI Plus interface
• Panel measuring system for manual cuts
• Remote cycle start button with safety stop, located at the second or third table
• Automatic lubrication
• Safety guards and protective devices
• Maximum cutting length: 3,800 mm
• Maximum saw blade projection: 108 mm
• Maximum gripper opening: 100 mm
• Minimum panel size on the lift table: 1,830 × 915 mm
• Maximum panel size on the lift table: 3,660 × 2,200 mm
Iedszug E Hepfx Ap Iebd
• Maximum stack height: 630 mm
• Minimum loading thickness on the lift table: 10 mm
• Working table height: 985 mm
• Lift table load capacity: 5,000 kgMain saw and scoring unit
• Main saw motor: 18.5 kW (25 hp)
• Scoring saw motor: 2.2 kW (3 hp)
• Main saw blade: Ø 400 mm, 1 included
• Scoring saw blade: Ø 200 mm with trapezoidal teeth, 1 included
• Saw blade lift driven by a brushless motor and ball screw
• Pressure beam opening control
• DIGISET electronic alignment of the scoring blade with the main saw blade
• Scoring unit can be disabled from the control panel
• QUICK CHANGE system for both saw blades
• Saw carriage travel speed: 1–160 m/min, brushless drive
• Maximum pusher speed: 90 m/min, brushless drive
• Side alignment unit integrated into the saw carriage (0 mm + 3,500 mm as specified in the quotation)Loading and unloading equipment
• Rear loading onto the lift table with powered rollers and automatic stack positioning at the zero point
• Powered rollers on the lift table for side loading
• Right-side loading and unloading with continuous operator control
• Two panel-counting devices for automatic loading of thin calibrated panels from 2.5 mm thick
• Automatic detection of the bottom support panel based on the thickness set in the machine parameters
• Six liftable pneumatic grippers in the standard configuration
• Two additional liftable pneumatic grippers with double lower fingers for mounting on the pusher
• Two pusher contact points
• Two front alignment stops
• Eleven standard roller modules and two additional roller modules with wheels
• One 2,050 × 850 mm unloading table with non-powered rollers, replacing the standard 2,050 × 620 mm air flotation table
• Two additional rounded air flotation unloading tables, each 2,050 × 620 mm
• One fan serving up to six air flotation tablesControl, maintenance and safety
• Windows-based PC control with flat-panel monitor, keyboard and mouse
• OSI Plus interface
• Panel measuring system for manual cuts
• Remote cycle start button with safety stop, located at the second or third table
• Automatic lubrication
• Safety guards and protective devices
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Barntrup
8,759 km
เครื่องตัดแผ่นไม้ BIESSE Selco WNT 630 (ผลิตปี 2022)
BIESSESelco WNT 630
BIESSESelco WNT 630
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
เยอรมนี
8,759 km
เครื่องตัดแผ่นไม้ Holzma รุ่น HPP 350/43/38 (ปี 2008)
HolzmaHPP 350/43/38
HolzmaHPP 350/43/38
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Bad Laer
8,827 km
เลื่อยวงเดือน
ScheerPA 4500
ScheerPA 4500
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Sliven
7,585 km
เครื่องเคลือบลูกกลิ้ง
CeflaSmartcoater MF EVO
CeflaSmartcoater MF EVO
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Drachten
8,935 km
แถบแผ่นแนวนอนเลื่อยตัดบาง
RHINO SAYWER300XL-3
RHINO SAYWER300XL-3
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Doetinchem
8,951 km
เลื่อยวงเดือน
ACMStar 700
ACMStar 700
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Toruń
8,108 km
เลื่อยแผ่น
HOMAGSAWTEQ B-200 Optimat HPL200/38/22
HOMAGSAWTEQ B-200 Optimat HPL200/38/22
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Bad Sooden-Allendorf
8,717 km
เครื่องกัดขอบ
BrandtOptimat F 13
BrandtOptimat F 13
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Tiszakécske
8,054 km
ศูนย์เครื่องจักรกล
HOMAGCENTATEQ P-110
HOMAGCENTATEQ P-110
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Roreto
9,030 km
เครื่องเลื่อยตัดแบ่งแผ่นพร้อมระบบจัดตำแหน่งแบบมุม - SawTeq
HOLZMA (HOMAG GROUP)SawTeq B-400 (HKL 400/43/22/16/L) Profil
HOLZMA (HOMAG GROUP)SawTeq B-400 (HKL 400/43/22/16/L) Profil
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด

















































































































