การเพิ่มประสิทธิภาพสายตัดขวาง

Bottene OPTI 599

OPTI 599 - year 2019.

The OPTI 599 is a high-performance crosscut saw which can increase your productivity by up to 30% compared to traditional ones. Designed for use in high-production lines for heavy-duty non-stop operation, it employs a hardened steel helical toothed roller drive system incorporating a powerful brushless motor that guarantees a 260 mt./1’ feed speed.

Cutting takes place by means of a connecting rod movement controlled by a brushless motor with 0.15 second cutting times.
The rejects are ejected at the rear at the moment of cutting and the sizes are separated at the exit on the sorting belt by means of lateral ejectors.

The board dimensions and the defects marked with fluorescent chalk are detected by a separate reading station.

TECHNICAL DATA OPTI 599
Blade diameter mm. 450/550
Motor power kw. 5,5/7,5
Feed speed mt./1′ 260
Cutting capacity mm. 45×200 (ø450)
80×240 (ø550)

Machine consists of :

1. Infeed conveyor-belt, width 250 mm.
Length 3500 mm.
Same motorization of the machine.
Reading station for detection of total length of
the board and of fluorescent chalk markings.
Gijdpfx Aoy R Tcyjlret

2. Optimizing Crosscut Saw OPTI 599
TCT tipped blade Ø 450mm.
Motor 7.5kw. with safety brake.
Cut controlled by brushless motor.
Power 42 Nm
Feeding thru dragging rolls with
vertical pressing wheels.
Dragging motor: Brushless 34 Nm.
Max. feeding speed: 300mt./1’.
2 brushless motors:
1 in the infeed power 42 Nm
1 in the outfeed power 42 Nm
Accuracy: +/-1mm.
Cut capacity: max 260 x 30 min.50 x 20 mm.

3.Electronic control by means of touch-screen keyboard.
Thru the keyboard, working parameters should be inserted, such as:
length of pieces to be cut in mm.,
n° of pieces to be cut,
box where to discharge such pieces,
clean cut in mm.,
tail cut in mm.,
scraps to be broken into pieces, in mm.,
minimum rest-piece, in mm.,
Furthermore on the keyboard we insert (protected by password)
all parameters for the good operation of the machine.
Remote support thru Ethernet rj 45.
Photocell to read the quality on the side.
Photocell to read the width of the boards.
5 different quality
5 different widths

4.Discharging conveyor 250 x 12.000mm.
with n° 8 lateral pneumatic discharging boxes.
Geared-motor 0.75kw.
Recovering plane for cut pieces.
H of the table of recovering H 800 mm

5. Discharging conveyor 350 x 2.500mm for small scraps
Geared-motor 0.37 kw.
1 flat conveyor.
1 inclined conveyor.