โรงโม่ปรับแต่งแรงกระแทกแบบ P-IICimma
Mulino raffinatore ad urto tipo P-II
โรงโม่ปรับแต่งแรงกระแทกแบบ P-II
Cimma
Mulino raffinatore ad urto tipo P-II
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€20,000
ปีที่ผลิต
2017
สภาพ
ใช้แล้ว
ที่ตั้ง
อิตาลี 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- โรงโม่ปรับแต่งแรงกระแทกแบบ P-II
- ผู้ผลิต:
- Cimma
- หมายเลขเครื่องจักร:
- PII n. 1681
- ปีที่ผลิต:
- 2017
- สภาพ:
- เกือบใหม่ (ใช้แล้ว)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€20,000
- ที่ตั้ง:
- , อิตาลี

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A20390735
- หมายเลขอ้างอิง:
- 1681
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 28.10.2568
คำอธิบาย
Impact Refiner Mill type P-II
Pgjdjxrk Itopfx Aayeu
Feeding: the mill must be supplied in a regular, continuous, and consistent manner.
Loading port on the front cover. Usable opening 305 x 250 mm.
Cast iron housing with hinged front cover, equipped with a safety microswitch.
Replaceable protective plates on the front and rear covers.
Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers.
Disc rotor with 4 fixed high-mass hammers, cast in manganese steel.
The rotor can be removed through the front cover.
Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals.
Perforated grid; the grid is removable through the front.
Rotation speed: 1800-2400 rpm.
Pulley for V-belts.
Required power: 22-30 kW.
Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard.
Support frame for mill and motor, complete with connection for aspirated discharge.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Pgjdjxrk Itopfx Aayeu
Feeding: the mill must be supplied in a regular, continuous, and consistent manner.
Loading port on the front cover. Usable opening 305 x 250 mm.
Cast iron housing with hinged front cover, equipped with a safety microswitch.
Replaceable protective plates on the front and rear covers.
Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers.
Disc rotor with 4 fixed high-mass hammers, cast in manganese steel.
The rotor can be removed through the front cover.
Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals.
Perforated grid; the grid is removable through the front.
Rotation speed: 1800-2400 rpm.
Pulley for V-belts.
Required power: 22-30 kW.
Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard.
Support frame for mill and motor, complete with connection for aspirated discharge.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+39 0832 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด




