Dust and chip extraction

CORMAK DCV21750

Advantages of DC Chip Extractors


The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor.

A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency.

The extractor is intended for dry sawdust and wood chips.

Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility.

Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector).

The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption.

A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points.

A multifunctional device with a modular system allowing any configuration of the extractor.

Warm air recovery system.

Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels.

For filtering smaller particles, a filter such as HEPA should be used.
Dwodpfx Amjx Agpzjvjd

It is forbidden to use this extractor in an explosive atmosphere.

The extractor is not designed to work with wet material (e.g., wet sawdust).

Industrial Chip and Sawdust Extractor DCV21750

Technical Specifications

Motor Power: 25 HP / 400 V, 50 Hz

Extraction Capacity: 21,750 m³/h

Inlet/Outlet Diameter: 400 / 400 mm

Suction Speed: 28 m/s

Number of Filters: 2 × 48

Number of Waste Bags: 8

Dimensions (L × W × H): 4600 × 1700 × 3500 mm

Weight: 1400 kg

SPECIAL OFFER!!! LAST UNIT IN STOCK!