เครื่องกัดและเจาะCORMAK
ZX7016 230V
เครื่องกัดและเจาะ
CORMAK
ZX7016 230V
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€550
ปีที่ผลิต
2025
สภาพ
ใหม่
ที่ตั้ง
Siedlce 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€550
- ที่ตั้ง:
- Brzeska 120, 08-110 Siedlce, PL
โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A19437906
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 10.10.2568
คำอธิบาย
ZX7016 – precision and stability as standard
The machine is equipped with a solid, massive cross table, ensuring smooth and precise work in two axes (X/Y), which allows for precise machining. There is a possibility of direct mounting of a vice on the work table (vice available as optional equipment). The cross work table is an integral element of the machine's construction, guaranteeing rigidity and reliability during operation.
Technical parameters:
Max. drilling diameter 16 mm
Max. vertical milling diameter 12 mm
Ijdpfewvhmwox Ahueih
Max. face milling width 40 mm
Motor S1/S6 0.55 kW / 0.75kW
Motor speed 1420 rpm
Voltage / frequency 230 V / 50 Hz
Table dimensions (length x width) 420 x 152 mm
Table travel in Y axis 115 mm
Table travel in X axis 230 mm
Column distance from spindle 180 mm
Height of spindle tip from table 155 - 355 mm
Spindle quill extension 77 mm
Spindle taper MK2
Spindle speeds 320,400,500,650,800,900,1350, 1450,1800,1900,2700,3300 rpm
Width and spacing of T-slots 12 x 80 mm
Weight 75 kg
Standard equipment
3-16 drill chuck
Drill chuck arbor
Cross table (work table)
Workshop lamp (included without bulb)
Handy tools
Operating instructions DTR
The machine is equipped with a solid, massive cross table, ensuring smooth and precise work in two axes (X/Y), which allows for precise machining. There is a possibility of direct mounting of a vice on the work table (vice available as optional equipment). The cross work table is an integral element of the machine's construction, guaranteeing rigidity and reliability during operation.
Technical parameters:
Max. drilling diameter 16 mm
Max. vertical milling diameter 12 mm
Ijdpfewvhmwox Ahueih
Max. face milling width 40 mm
Motor S1/S6 0.55 kW / 0.75kW
Motor speed 1420 rpm
Voltage / frequency 230 V / 50 Hz
Table dimensions (length x width) 420 x 152 mm
Table travel in Y axis 115 mm
Table travel in X axis 230 mm
Column distance from spindle 180 mm
Height of spindle tip from table 155 - 355 mm
Spindle quill extension 77 mm
Spindle taper MK2
Spindle speeds 320,400,500,650,800,900,1350, 1450,1800,1900,2700,3300 rpm
Width and spacing of T-slots 12 x 80 mm
Weight 75 kg
Standard equipment
3-16 drill chuck
Drill chuck arbor
Cross table (work table)
Workshop lamp (included without bulb)
Handy tools
Operating instructions DTR
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+48 25 63... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด