เครื่องฉีดขึ้นรูปCronoplast
Babyplast UAI I/12
เครื่องฉีดขึ้นรูป
Cronoplast
Babyplast UAI I/12
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€10,000
ปีที่ผลิต
2021
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Erkelenz 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- เครื่องฉีดขึ้นรูป
- ผู้ผลิต:
- Cronoplast
- รุ่น:
- Babyplast UAI I/12
- หมายเลขเครื่องจักร:
- UA0374
- ปีที่ผลิต:
- 2021
- สภาพ:
- ใช้แล้ว
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€10,000
- ที่ตั้ง:
- Erkelenz, เยอรมนี

โทร
รายละเอียดทางเทคนิค
ขนาดและน้ำหนัก
น้ำหนักรวม:
140 กก.
เครื่องยนต์และกระปุกเกียร์
ปริมาตรกระบอกสูบ:
15 ซม.³
รายละเอียดกำลัง
แรงดันไฟฟ้าขาเข้า:
400 V
ความถี่ขาเข้า:
50 Hz
กระแสไฟฟ้าขาเข้า:
8 A
รายละเอียดเพิ่มเติม
แรงดันการฉีด:
2,025 แท่ง
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23338001
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 15.11.2569
คำอธิบาย
For sale: Babyplast auxiliary injection unit, type UAI I/12, manufactured in 2021, mobile on rollers, with touchscreen control. Autonomous injection unit for mounting on an injection molding machine or on the mold (e.g., for multi-component, overmolding, or insert applications).
Technical data (according to the nameplate):
- Manufacturer: Cronoplast S.L., Abrera (Barcelona), Spain
- Type: Babyplast UAI I/12, schema BP338, serial no. UA0374, manufactured in 2021
- Total weight: 140 kg
- Input voltage: 400 V 3L+N or 230 V 3L
- Input frequency: 50/60 Hz
- Rated current: 7.5 A (400 V) or 11 A (230 V)
- Short-circuit current Icu: 3.5 kA
Technical data (according to manufacturer's specifications Babyplast I/12):
Ibedpfxs Akiavs Ai Ned
- Injection volume (displacement): 3 to 15 cm³ depending on the piston
- Piston diameter: 10 to 18 mm (5 interchangeable pistons; 10 mm = max. 4 cm³, 18 mm = max. 15 cm³)
- Injection pressure: approx. 815 to 2,025 bar depending on the piston
- Hydraulic injection unit with piston (no screw), therefore no screw diameter specification
- Mounting: directly to mold or machine, horizontally or vertically, via two standard flanges on a fixed or moving mold half
- Interface to the main machine via a few potential-free contacts, operates hydraulically and electronically independently
- Cooling water requirement: approx. 100 l/h
- Note: The unit does not have its own clamping unit, therefore no clamping force and no tie bar spacing. Overall length and width available upon request.
Equipment as shown in the photos:
- Touchscreen control panel with emergency stop, key switch, main switch, and pressure display
- Material hopper with conveying unit
- Connection cables, hoses, and hydraulic/pneumatic connections
- Operating manual (German, Rev. 10)
- DGUV-V3 inspection label
Used, signs of wear and tear as shown in the photos. The machine can be inspected during operation (appointment by arrangement). Disassembly and loading by the buyer; loading with a forklift is possible. Location: Erkelenz. Collection only.
Sale excludes any warranty, guarantee, and right of return.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Technical data (according to the nameplate):
- Manufacturer: Cronoplast S.L., Abrera (Barcelona), Spain
- Type: Babyplast UAI I/12, schema BP338, serial no. UA0374, manufactured in 2021
- Total weight: 140 kg
- Input voltage: 400 V 3L+N or 230 V 3L
- Input frequency: 50/60 Hz
- Rated current: 7.5 A (400 V) or 11 A (230 V)
- Short-circuit current Icu: 3.5 kA
Technical data (according to manufacturer's specifications Babyplast I/12):
Ibedpfxs Akiavs Ai Ned
- Injection volume (displacement): 3 to 15 cm³ depending on the piston
- Piston diameter: 10 to 18 mm (5 interchangeable pistons; 10 mm = max. 4 cm³, 18 mm = max. 15 cm³)
- Injection pressure: approx. 815 to 2,025 bar depending on the piston
- Hydraulic injection unit with piston (no screw), therefore no screw diameter specification
- Mounting: directly to mold or machine, horizontally or vertically, via two standard flanges on a fixed or moving mold half
- Interface to the main machine via a few potential-free contacts, operates hydraulically and electronically independently
- Cooling water requirement: approx. 100 l/h
- Note: The unit does not have its own clamping unit, therefore no clamping force and no tie bar spacing. Overall length and width available upon request.
Equipment as shown in the photos:
- Touchscreen control panel with emergency stop, key switch, main switch, and pressure display
- Material hopper with conveying unit
- Connection cables, hoses, and hydraulic/pneumatic connections
- Operating manual (German, Rev. 10)
- DGUV-V3 inspection label
Used, signs of wear and tear as shown in the photos. The machine can be inspected during operation (appointment by arrangement). Disassembly and loading by the buyer; loading with a forklift is possible. Location: Erkelenz. Collection only.
Sale excludes any warranty, guarantee, and right of return.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ออนไลน์ล่าสุด: เมื่อวานนี้
ลงทะเบียนตั้งแต่: 2023
19 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 2433 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด










