ร้อน: +50°C / +200°C เย็น: -80°C / +100°C

CTS Temperaturschock-Prüfschrank TSS-70/130 130 Liter

CTS
Type: TSS-70/130
Water-cooled chiller unit
For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130.

This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance.

Application fields:
- Material testing
- Aging tests
- Electronics and component testing
- Thermal shock and temperature cycling tests

Technical specifications:

Type: TSS-70/130
Test volume: 130 liters
Temperature range:
- Hot chamber: +50°C to +200°C
- Cold chamber: -80°C to +100°C
Heating rate: approx. 6 K/min from room temperature to +180°C
Cooling rate: approx. 4 K/min from room temperature to -60°C
Temperature deviation:
±1 K over time
±2 K spatially
Temperature change rate:
Max. 100 K/min on average for shock test cycles (without radiant heat)
Transfer rate:
≤ 15 min in the range -65°C to +200°C with 10 kg ICs
Transfer time:
< 10 seconds

Electrical data:
Connection: 400 V, 3/N, 50 Hz
Nominal power: approx. 16.7 kW
Nominal current: approx. 26.8 A
Site-side fuse: 32 A slow-blow
Connection: Cekon 32

Cooling system:
Refrigerant: R404A / R23
Water-cooled, low noise, fully hermetic

Features and equipment:
- CTS control panel
- Microprocessor-controlled regulation and monitoring system
- Program operation (up to 100 test programs)
- Digital setpoint/actual value display
- RS232 interface
- 2 free switching channels for controlling test objects on-site
- Fault alarm with floating contact (rated for up to 30 V-DC, 2 A)
- EMC tested

Technical design:
- Hot and cold chambers
- Transport basket with spindle drive
- Test chamber / basket made of stainless steel, Material no. 1.4301
- Insert basket made of stainless steel wire
Nwsdoy Hkfdepfx Amlef
- Pipe duct NW 50 with closing plug
- Compressed air connection 1/4" male
- Pressureless condensate drain R 1/2" internal thread
- Safety door lock
- Lockable door with window

Dimensions as per installation drawing:
External dimensions approx.: 2335 x 940 x 1820 mm
Entry dimensions approx.: 1990 x 940 x 1652 mm
Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm
Window: 300 x 300 mm

Further data:
Degree of protection: IP 22
Sound pressure level: < 60 dB(A)
Weight: approx. 950 kg
Average power consumption per test cycle: approx. 8 kWh

For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand:
1. Function check and replacement of necessary components
2. If required, recharge with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, chambers undergo a documented trial run

Condition: used
Scope of delivery: see pictures
(Specifications subject to change and errors excepted!)

If you have further questions, we are happy to assist you by phone.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้