เครื่องตัดเลเซอร์

Trumpf TCF 1

ITEC Automation & Laser AG Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Decoiler MHR 2.5 / 1250 + Straightening and Feeding Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot

The machine will remain in operation until week 35.

The system has been regularly serviced and was partially overhauled in 2022.

Sale does not include extraction system and platform!

TECHNICAL DETAILS

Trumpf TCF 1  MHR 2.5 / 1250 

Wavelength: 10.6 μm
Maximum output power: 2,000 W
Continuously adjustable power range: 100–2,000 W
Power stability referenced to nominal output: ±2 %

Beam diameter at the output window: 26 mm
Divergence angle (half angle): 0 mrad
Power distribution: TEM₀₀

Pulse frequency: 10 Hz–100 kHz
Marking mode frequency: 10 Hz
Marking mode power: 80 W
Pulse width: 10 μs–CW

Decoiler MHR 2.5 / 1250

Load capacity: max. 2,500 kg
Outer coil diameter: max. 1,250 mm
Strip width: max. 600 mm
Expansion range: min. 380 (480) mm
Expansion range: max. 430 (530) mm
Mandrel height: 1,000 mm

Drive and speed
Speed: approx. 17.5 rpm
Electric auxiliary drive power: 1.1 kW

Electrical connection
Supply voltage: 3 × 400 V
Frequency: 50 Hz

Noise emission
Sound level: 70 dB(A)

EQUIPMENT
Fixed trailing edge
Neutral conductor (N) and protective earth (PE)

Straightening and feeding machine VRMA 80 / 76

Passage width: max. 100–800 mm
Strip thickness: min. 0.4 mm
Strip thickness: max. 1.5 mm
Strip thickness at full width: max. 1.0 mm

Number of straightening rollers: 7
Number of feed rollers: 2
Roller diameter: 60 mm
Straightening roller spacing: 130 mm

Speed: approx. 15 m/min
Pass height above floor: approx. 1,000 mm

Drive type: Servomotor
Electric drive power: 2.2 kW
Drive speed: 3,000 rpm

Supply voltage: 3 × 400 V
Frequency: 50 Hz
Conductors: N, PE

Sound level: 70 dB(A)

Motoman ERCS-HP20-AE00 Robot

Number of axes: 6
Payload: 20 kg
Repeatability: ±0.06 mm
Weight: approx. 280 kg

S-axis (rotation): ±180°
L-axis (lower arm): +155° / -110°
U-axis (upper arm): +255° / -165°
R-axis (wrist roll): ±200°
B-axis (wrist pitch): ±140°
T-axis (wrist twist): ±360°

S-a