กดต่อเนื่องDIMTER
DKV III Speed max. 70 m/min
กดต่อเนื่อง
DIMTER
DKV III Speed max. 70 m/min
สภาพ
ใช้แล้ว
ที่ตั้ง
Achern 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
- ที่ตั้ง:
- Am Risisee 4, 77855 Achern-Gamshurst, DE
โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A18831796
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 05.04.2568
คำอธิบาย
Refurbished DKV III through-feed press with brake unit
Optionally with original hydraulic motors or conversion to servo motors
Options:
- Chain threading
- Traveling cross-cut saw
Function:
For pressing finger joints without stopping (in through-feed).
The upper and lower plate chains generate feed force.
Downstream brake plates transmit the required longitudinal pressing force to the wood through friction.
Advantages:
- High performance despite relatively slow feed rate
- Absolutely no vertical tine offset of the finger joints
Technology:
Heavy 2" plate chain, pneumatically raised and lowered
Floating brake elements
Pressing force measurement via contact pressure gauge
Electric height adjustment
Maximum pressing force adjustable and dependent on feed speed and wood cross-section:
4500 daN at 32 m/min
2200 daN at 70 m/min
Adjustable feed speed: 10-70 m/min
Drive power:
Itodpfxev T Aqys Ahuon
Feed unit adjustment: 1 kW
Brake adjustment: 1 kW
Hydraulic motors: 45 kW
Technical specifications:
Log width: 90 - 180 mm
Log thickness: 20 - 80 mm
Thickness to width ratio: 6:10
Maximum wood cross-section with 15/16.5 mm tines: 90 cm²
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Optionally with original hydraulic motors or conversion to servo motors
Options:
- Chain threading
- Traveling cross-cut saw
Function:
For pressing finger joints without stopping (in through-feed).
The upper and lower plate chains generate feed force.
Downstream brake plates transmit the required longitudinal pressing force to the wood through friction.
Advantages:
- High performance despite relatively slow feed rate
- Absolutely no vertical tine offset of the finger joints
Technology:
Heavy 2" plate chain, pneumatically raised and lowered
Floating brake elements
Pressing force measurement via contact pressure gauge
Electric height adjustment
Maximum pressing force adjustable and dependent on feed speed and wood cross-section:
4500 daN at 32 m/min
2200 daN at 70 m/min
Adjustable feed speed: 10-70 m/min
Drive power:
Itodpfxev T Aqys Ahuon
Feed unit adjustment: 1 kW
Brake adjustment: 1 kW
Hydraulic motors: 45 kW
Technical specifications:
Log width: 90 - 180 mm
Log thickness: 20 - 80 mm
Thickness to width ratio: 6:10
Maximum wood cross-section with 15/16.5 mm tines: 90 cm²
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2013
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 7841 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด