กึ่งพ่วงเปิดพร้อมผ้าใบคลุมDINKEL
3-Achs-Sattelanhänger, Pritsche+Plane, LBW
กึ่งพ่วงเปิดพร้อมผ้าใบคลุม
DINKEL
3-Achs-Sattelanhänger, Pritsche+Plane, LBW
สภาพ
ใช้แล้ว
ที่ตั้ง
Essen 

ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
- ที่ตั้งผู้ขาย:
- Heegstraße 6-8, 45356 Essen, เยอรมนี

โทร
รายละเอียดทางเทคนิค
- น้ำหนักบรรทุกสูงสุด:
- 31,710 กก.
- น้ำหนักรวม:
- 42,000 กก.
- การกำหนดค่าของเพลา:
- 3 เพลา
- การลงทะเบียนครั้งแรก:
- 10/2016
- ความกว้างทั้งหมด:
- 2,550 มม
- อุปกรณ์:
- เอบีเอส
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A21746438
- หมายเลขอ้างอิง:
- 37809
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 01.05.2569
คำอธิบาย
You can find our entire range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment features. Complete specification available on request.
- Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm
- 24,000 kg telescopic support winches with load and fast operation modes
- Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations
- 8 stake pocket inserts (for 2nd bulkhead)
- Aluminum roof girders with sliding tarpaulin
- Rear stakes extendable to approx. 3,500 mm (for loading and unloading only)
- Three sliding stanchions on each side
- End stanchions extendable lengthwise in direction of travel
- Complete front wall designed as storage compartment with integrated shelving system, interior closed
- DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only
- Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting
- Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift)
- Upper rear portal crossbar with movable sliding tarpaulin
- Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals
- WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV
- ECAS air suspension with raise/lower function
- Wabco Smart Board with axle load display and hubodometer
- 3 x 10,000 kg SAF axles with drum brakes
- 3rd axle: friction-steered trailing axle
- 1st axle liftable
Codpfxoy Dy Ehj Al Rjrc
- Tires: 235/75 R 17.5
- Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm
- Hydraulic auxiliary stabilizers with automatic ground leveling
- Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg
- Chassis painted in MB nova grey
- White bodywork with customer-specific tarpaulin lettering
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Excerpt from the equipment features. Complete specification available on request.
- Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm
- 24,000 kg telescopic support winches with load and fast operation modes
- Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations
- 8 stake pocket inserts (for 2nd bulkhead)
- Aluminum roof girders with sliding tarpaulin
- Rear stakes extendable to approx. 3,500 mm (for loading and unloading only)
- Three sliding stanchions on each side
- End stanchions extendable lengthwise in direction of travel
- Complete front wall designed as storage compartment with integrated shelving system, interior closed
- DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only
- Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting
- Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift)
- Upper rear portal crossbar with movable sliding tarpaulin
- Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals
- WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV
- ECAS air suspension with raise/lower function
- Wabco Smart Board with axle load display and hubodometer
- 3 x 10,000 kg SAF axles with drum brakes
- 3rd axle: friction-steered trailing axle
- 1st axle liftable
Codpfxoy Dy Ehj Al Rjrc
- Tires: 235/75 R 17.5
- Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm
- Hydraulic auxiliary stabilizers with automatic ground leveling
- Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg
- Chassis painted in MB nova grey
- White bodywork with customer-specific tarpaulin lettering
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2003
73 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 201 8... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด




















