ศูนย์เครื่องจักรกลแนวนอน

DMG MORI NHX5000

Machine Description for 2017 Model: Horizontal Machining Center NHX 5000

Manufacturer: DMG MORI Co. Ltd.
Type / Model: NHX 5000_M730UM, Series J-NHX5000-C_C01
Year of Manufacture: 2016
Control System: MAPPS M730UM with CELOS / 21.5" ERGOline Touch

Technical Data:
• Working Area / Travel:
- Travel X / Y / Z: 730 / 730 / 880 mm
- Pallet size: 500 × 500 mm
- Max. workpiece diameter: 800 mm
- Max. workpiece height: 1,000 mm
- Distance spindle center to pallet surface: 80 – 810 mm
- Distance pallet center to spindle reference plane: 70 – 950 mm
- Pallet load: 500 kg [optional 700 kg]
- Number of pallets: 2
- Minimum table indexing angle: 1° [optional 0.001° rotary table]

• Performance / Spindle Speed / Drive Power:
- Spindle type: speedMASTER® motor spindle
- Spindle speed range: 35 – 15,000 rpm
- Power: 30.7 / 26 / 18.5 kW (15% ED / 30 min / continuous)
- Torque: 207 / 95.5 Nm (10% / 100% duty cycle)
- Tool taper: BT40 / #40
- Tool magazine capacity: 40 tools [optional: 60 / 120 / 180 / 240]
- Max. tool diameter: 70 mm (adjacent) / 170 mm (free)
- Max. tool length: 550 mm
- Max. tool weight: 12 kg
- Tool change time (chip-to-chip): 2.5 s
- Rapid traverse X/Y/Z: 60 m/min
- Feedrate range: 0 – 60,000 mm/min
- Acceleration: 1 G

• Weight / Dimensions / Electrical Connection:
- Machine weight (incl. coolant tank): approx. 12,000 kg
- Installation footprint (W × L): 3,078 × 4,784 mm
- Overall height: 2,852 mm
- Coolant tank capacity: 800 L
- Power supply: 37.3 kVA
- Compressed air: 0.5 MPa / 420 L/min

Equipment / Accessories:
- NC rotary table with 0.001° indexing (DDM optional)
- Automatic 2-pallet changer (rotary APC)
- Two pallets with threaded holes and hydraulic fixture interface
- Chip conveyor (rear discharge)
- Direct measuring systems on X/Y/Z axes
- Renishaw OMP60 spindle probe system
- Tool breakage monitoring in the magazine
- High-pressure coolant interface (70 bar, Knoll)
Ijdpfxsxnkgne Af Tsa
- Coolant/air switching device for through-spindle supply
- Rotating inspection window
- Coolant gun
- Oil mist separator interface Ø200 mm (LTA AC3002 optional)
- Automatic loading station door
- Signal tower (red/yellow/green/blue)
- Portable manual pulse generator (handwheel)
- Air filter unit for clean compressed air supply
- 45 kVA transformer
- Knoll KF110/700 high-pressure coolant unit (7.0 MPa, 31 L/min)
- Three hydraulic clamping towers with double-jaw chucks
- CELOS system with apps (Production, Accessories, Support, Monitoring, Configuration)
- MAPPS M730UM control with 21.5" touchscreen and 15.6" sub-display
- SmartKey® operator access management

This technical description follows industry standards for horizontal machining center listings, ensuring clarity for prospective buyers on leading platforms such as Machineseeker.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้