DMG NHX5000DMG
NHX5000
DMG NHX5000
DMG
NHX5000
ปีที่ผลิต
2023
สภาพ
ใช้แล้ว
ที่ตั้ง
ออสเตรีย 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- DMG NHX5000
- ผู้ผลิต:
- DMG
- รุ่น:
- NHX5000
- ปีที่ผลิต:
- 2023
- สภาพ:
- พร้อมใช้งาน (มือสอง)
- ชั่วโมงการทำงาน:
- 1,612 h
ราคาและสถานที่
- ที่ตั้ง:
- , ออสเตรีย

โทร
รายละเอียดทางเทคนิค
ขนาดและน้ำหนัก
น้ำหนักรวม:
12,000 กก.
แกนหมุน
กำลังมอเตอร์สปินเดิล:
37,000 วัตต์
ความเร็วแกนหมุน (สูงสุด):
20,000 รอบ/นาที
ข้อกำหนดของเพลา
ระยะเคลื่อนที่แกน X:
730 มม
ระยะเคลื่อนที่แกน Y:
730 มม
ระยะเคลื่อนที่ตามแกน Z:
880 มม
รายละเอียดเพิ่มเติม
ผู้ผลิตคอนโทรลเลอร์:
FANUC
รุ่นของคอนโทรลเลอร์:
F31iB with CELOS
จำนวนเพลา:
4
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23352278
- หมายเลขอ้างอิง:
- AT-MIL-DMG-2023-00001
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 18.11.2569
คำอธิบาย
This 4-axis DMG NHX5000 was manufactured in 2023. It features X, Y and Z travels of 730, 730 and 880 mm, a 20,000 rpm spindle, and a 60-tool magazine. The machine also includes a two-station automatic pallet changer with 500 x 500 mm pallets. Consider the opportunity to buy this DMG NHX5000 horizontal machining centre. Contact us for further details.
Ibedpfxs Aky T As Ai Nsd
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Ibedpfxs Aky T As Ai Nsd
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Düsseldorf
8,932 km
ศูนย์การกลึงแนวนอน
DMG MORINHX 5000
DMG MORINHX 5000
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Monheim am Rhein
8,930 km
ศูนย์เครื่องจักรกลซีเอ็นซีแนวนอน
DMG MORINHX 5000
DMG MORINHX 5000
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
ออสเตรีย
8,914 km
DMG MORI NHX 5000
DMG MORINHX 5000
DMG MORINHX 5000
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
การประมูล
การประมูลสิ้นสุดแล้ว
Bayern
8,665 km
ศูนย์การกลึงแนวนอน
DMGNHX 5000
DMGNHX 5000
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด











































































