เครื่องเจาะเรเดียลความเร็วสูง

DONAU Danuport 540

Dimensions and Travel Ranges
Tool holder: SK 40
Table dimensions: 4000 x 800 mm
Number of T-slots: 6
T-slot spacing: 140 mm
Distance: Spindle lower edge min. 140 mm
Table upper edge max. 740 mm
Boring radius: min. 540 mm
max. 1590 mm
Travel range U-axis: 2600 mm
Travel range Y-axis: 1050 mm
Quill stroke (Z-axis): 200 mm
Column stroke (W-axis): 400 mm

Machining Data
Drilling capacity in steel St 60: 40 mm
Drilling capacity in cast iron GG 22: 50 mm
Thread cutting: St 60: M 36
Thread cutting: GG 22: M 42

Main Spindle Drive
AC motor, frequency-controlled: 5.5 kW at 100% duty cycle
Speed range: 15 - 2800 min-1
Torque: max. 250 Nm
Constant from: 15 - 200 min-1

Feed Drives
X-axis - AC servo motor: 0.25 kW
Y-axis - AC servo motor: 0.25 kW
Z-axis - AC servo motor: 4.50 kW
W-axis - AC servo motor: 2.50 kW
U-axis - AC servo motor: 2.50 kW
Rapid traverse rates (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse rates (U/W): 7.5 / 3 m/min
Feed rates, stepless: 5 - 2000 mm/min
Feed force: 12000 N

Accuracy
Kodoy Ttrtjpfx Alrjlt
Positioning accuracy X, Y-axis on 1200 mm: ± 0.075 mm
Repeatability X, Y-axis: ± 0.03 mm
Positioning accuracy Z-axis: ± 0.05 mm
Repeatability Z-axis: ± 0.03 mm
Positioning accuracy W-axis: ± 0.05 mm
Repeatability W-axis: ± 0.03 mm

Electrical Data
Operating voltage / frequency: 400 / 50 V / Hz
Control voltage: 24 V
Total connected load: 13.0 kVA

CNC Control
Axes: 5 (X, Y, Z, W, U), expandable
Display: TFT flat screen, backlit, easily readable from all sides
Position data: Cartesian or polar, dimension data absolute or incremental
Units: mm or inch, or in degrees
Interpolation: 2 axes (X, Y)
Technology database: Tool management, tool suggestions based on machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subprogram technique: yes
Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking and counterboring, freely programmable cycle for special tools, dwell time possible for each cycle
Chip breaking / chip removal: possible during drilling cycle
Drilling patterns: hole pattern, hole circle, matrix
Basic software: Programming in dialog mode, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- rectangular parts mounted in any way
- round parts mounted in any way
- determination of castings and forgings
- angle detection in round parts by probing reference edges or surfaces
Data interfaces: USB interface

Painting (Repainting)
Standard painting, two-component textured paint
Machine upper part: light gray RAL 7035
Machine lower part: signal blue RAL 5005

Documentation
Operating and programming manual
Electrical circuit diagram
Spare parts drawings
Test report for mechanics, electrical components and safety devices

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้