เครื่องเจาะแนวรัศมีอย่างรวดเร็ว

Donau DONAUMERIC440

Machining capacity:
Drilling capacity into solid steel 60/40 mm
Drilling capacity into solid steel 20/50 mm
Tapping capacity into solid steel 60/M 36
Tapping capacity into solid steel 20/M 42
WORKING AREA:
Boom travel (Y-axis) 1050 mm
Column stroke (W-axis) 410 mm
Quill stroke (Z-axis) 200 mm
Distance from spindle bottom edge to table top edge, drilling radius 80-690 mm
Swivel angle (C-axis) 330 degrees
Central clamping of boom and column
MACHINE TABLE
Working table surface 1800 x 600 mm
With 4 T-slots according to DIN 650 in the X-direction (width/spacing) 18 h9/125 mm
Machine table height 900 mm
CONTROL / OPERATION
CNC control S-Box III
Processor: 32-bit CPU
Screen: TFT flat screen, backlit, easy to read from all sides. 215 x 160 mm, Cartesian or polar.
Interpolation: 2 axes (X, Y)
Technology database: Tool management. Tool suggestions based on machining type. Material-dependent cutting data suggestions.
Tool management: Max. 500 tools.
Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking, and boring.
Chip breaking/removal: Possible with drilling cycle.
Drilling patterns: Hole row, bolt circle matrix.
Basic software: Programming in dialog. 38 zero points can be saved. Rotate and mirror. Teach-in for X, Y. Z.
Test graphics: Graphic display of drilling patterns
Data interfaces: V.24/RS 232-C
USB: For reading and reading data with an industrial-grade 256 MB
MAIN SPINDLE DRIVE:
Frequency-controlled three-phase asynchronous motor
Drive power (100% duty cycle) 5.5 kW
Torque (100% duty cycle) 250 Nm
Constant from 15-200 rpm
Spindle speed range continuously variable 12-2800 rpm
Steep taper spindle: Tool holder according to DIN 69871 SK40
with pull studs according to DIN 69872-19
AXIS DRIVES
C-axis, Y-axis, Z-axis, W-axis max. 0.35/0.35/2.90/2.40 kW
Rapid traverse speed continuously variable
Cgedewmcatepfx Ag Ejn
C-axis max. 4.5 rpm, Y-axis and Z-axis max. 7.5/5.0 m/min
W-axis max. 3.0 m/min
Feed speed continuously variable
C-axis, Y-axis, Z-axis, W-axis 5-2000 m/min
Feed force (Z-axis) max. 12,000 N
LUBRICATION
Centralized manual lubrication
MACHINE ENCLOSURE
Protective grille system arranged around the machine. with mesh grille
External dimensions 6000 x 6000 ITTTI (w x h). Height of system element approx. 2000 mm
1 access (wing gate located at the front of the machine. Opening width approx. 2000 mm)
Manual opening and closing. Safety door switch with magnetic locking.
ELECTRIC, PNEUMATIC, HYDRAULIC DECORATOR POWER CONNECTION
Mains connection 400/50 volts/Hz
Control voltage 24 volts, power consumption 13 kVA, fuse 35 A
Operating voltage: 3 x 400 volts AC/N/PE +5% -10%. N conductor load capacity. Frequency: 50 Hz.
PAINT
DD textured paint
Machine upper section light gray RAL 7035, machine lower section RAL 5023
TRANSPORT DIMENSIONS
Width 1900 mm
Depth 2,565 mm
Height 2,788 mm
MACHINE WEIGHT
Machine as a transport unit with standard table approx. 2,950 kg
OPTIONS:
Base plate
with circumferential coolant channel. Clamping area 1,000 x 1,400 mm.
Height 100 mm with 4 T-slots
Electronic probe
Including SK 40 chuck
Pick-up tool magazine
Programmable tool change for rear workstation. The magazine arrangement with 5 tool positions including
protective cover is attached to the right side of the machine.
Coolant system version A
integrated in the machine base for machines without a base plate, consisting of: Coolant tank with a capacity of 35 l. Coolant pump complete with fittings, flow rate approx. 40 rpm at 0.4 bar.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้