เครื่องมิลลิ่ง - แนวตั้ง

EHLMANN Picomax 21M

x-travel 450 mm
y-travel 260 mm
z-travel 450 mm
control NC
turning speeds 50-6.300 U/min
feed 0-2000 m/min
rapid traverse 7200 mm/min
tool taper SF 32 Fehlmann
clamping table 450 x 260 mm
bore spindle stroke 110 mm
Number of axles 3 St.
Number of working hours 2060 h
total power requirement 2,9 kW
weight of the machine ca. 900 kg
dimensions of the machine ca. 1700 x 1350 x 2000 mm
FEHLMANN Picomax 21M precision milling, drilling and coordinate machine

The machine has been used very little and is in top condition.
The accessories enable almost any form of machining of individual parts,
except for contours.


Year of manufacture: 2017
Operating hours: 2060
Connection 400V/50Hz
Space requirement Width/depth/height 1700x1350x2000

Machine

- Heidenhain Positip 8013 Active with touchscreen
- Electronic, infinitely variable spindle speed control 50-6300 rpm
Lhedpeymf Dtsfx Abvoc
- Power 2.9 kW, max. 40 Nm
- Feed 0-2000 mm/min manually controllable and programmable
- Weight approx. 950 kg
- SF 32 quick-change tool system
- Right/left thread cutting
- LED lighting
- Adjustment ranges: 450 mm (column), 110 mm (quill)
- Adjustable stop for quill
- Machine base with built-in tool cabinet with storage for spindle tools
- Fine depth adjustment Z-axis via handwheel
- KS 323 M coordinate table for manual and automatic positioning
- Direct measuring system in X and Y, travel distances X/Y 450 x 260

Accessories

- Fehlmann sine table
- Fehlmann part setting device, detent adjustable from 15 to 120 degrees, any
intermediate angle possible
- Röhm Dmr 140 chuck with 40 mm passage for part setting
- ER32 collet holder incl. 18 collets for part setting
- Allmatic 160 mm vice with integrated stop system (stop pin
in jaws)
- 4/6-sided partial device for collets 5c (without collets)
- Röhm Dmr 160 turning chuck for clamping in vice
- Tool magazine with swivel arm for 15 tools SF32
- Tool clamping device SF32
- 20 quick-change inserts SF 32 (collets, cutter heads, milling cutters)
- 18 collets ER 16
- 35 collets ER 25
- Edge finder and insert SF32 with fine lever gauge for alignment
- Preparation for electronic probe
- Various milling tools up to Dmr 20
- Technical documentation in electronic and paper form
- Heidenhain operating and programming instructions Positip 8013
- Machine is without coolant system

Control functions
- Manual and semi-automatic machining (manual, MDI, NC, Z-axis manual)
- Storage of speeds, tool data, zero points and programmes
- Processing of linear sets, hole patterns, rectangular pockets, no circular
pockets
(PTP control)
- Printer output, file import and export


Translated with (free version)