กึ่งพ่วงแพลตฟอร์มทำงาน

ES-GE 3-Achs Sattelanhänger - Rungen + CV

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment list:
Complete equipment upon request.

Chassis:
* Welded construction made of high-quality steel profiles with continuous profile cross members
* Designed for high point loads
* Underrun protection, width approx. 700 mm
* Outer frame as a UNP profile
* Wear plate approx. 8 mm
* Kingpin height at the front approx. 130 mm
* Towing device: 2-inch kingpin
* Underrun protection: bolted design, according to EC; side impact protection: according to EC, made of aluminum profiles
* Anodized
* Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side

Axles:
* 3 x 9 t air suspension axle units
* Disc brakes 22.5, total travel approx. 180 mm
* Raising and lowering device via rotary slide valve
Prsdpfx Ajztuaceiteb

Braking System:
* Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent control
* Spring brake cylinders as parking brake
* Interlocking coupling heads permanently mounted on the front cross member
* Without connection line to the towing vehicle

Tires:
* 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120
* Manufacturer of our choice
* Tire pressure monitoring system (TPMS) via CAN bus system of the EBS

Load Securing:
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t
* In the outer frame, holes are provided every approx. 400-600 mm for attaching lashing straps

Front Wall:
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Interior lined with approx. 9 mm screen-printed sheet metal (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles

Lighting:
* According to EC, 24 volts, with multi-chamber lights
* LED side marker lights
* LED position lights, white at the front
* LED outline lights at the rear
* License plate lights
* Lane-keeping lights, LED. 1x15-pin and 2x7-pin connectors on the front cross member

Equipment:
* Rear right-hand side, folding and extendable access ladder (without platform)
* 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles

Paint Finish:
* Front wall: RAL 3002 carmine red
* Chassis: Hot-dip galvanized
* Outer frame: Hot-dip galvanized + RAL 3002 carmine red

Including additional equipment:
* First axle liftable, with fully automatic
* Load-dependent lift control
* 10 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets transverse to the loading area
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes
* Container locking for 1 x 40? and 2 x 20? containers, flush at the rear. Container locking for 1 x 20? container in the middle
* Work light on the lamp carrier (switched via reverse gear)
* 2 stainless steel toolboxes, approx. 600x500x500 mm, one on the left and one on the right

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้