กึ่งพ่วงแพลตฟอร์มทำงานFAYMONVILLE
Doppeltele, MAX Trailer MAX210 Telesattel
กึ่งพ่วงแพลตฟอร์มทำงาน
FAYMONVILLE
Doppeltele, MAX Trailer MAX210 Telesattel
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€98,900
สภาพ
ใช้แล้ว
ที่ตั้ง
Essen 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€98,900
- ที่ตั้งผู้ขาย:
- Heegstraße 6-8, 45356 Essen, เยอรมนี
โทร
การขายเครื่องจักร

คุณได้ลงประกาศขายเครื่องจักรมือสองของคุณแล้วหรือยัง?
ขายผ่าน Machineseeker โดยไม่มีค่าคอมมิชชั่น.
ข้อมูลเพิ่มเติมเกี่ยวกับการขายเครื่องจักร
ข้อมูลเพิ่มเติมเกี่ยวกับการขายเครื่องจักร
รายละเอียดทางเทคนิค
- น้ำหนักรวม:
- 48,000 กก.
- น้ำหนักบรรทุกสูงสุด:
- 36,300 กก.
- การกำหนดค่าของเพลา:
- 3 เพลา
- การลงทะเบียนครั้งแรก:
- 08/2024
- ตรวจสอบครั้งถัดไป (TÜV):
- 08/2025
- ความกว้างทั้งหมด:
- 2,540 มม
- อุปกรณ์:
- เอบีเอส
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A12865280
- หมายเลขอ้างอิง:
- 31536
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 29.08.2568
คำอธิบาย
You can find our complete range of vehicles, including those available immediately and at short notice, on our website.
Excerpt from the equipment. Full equipment details available upon request.
- Load area in a double-extendable version with pneumatically operated locking mechanism
- A fixed intermediate table, approx. 250 mm wide, mounted on the central beam
- BPW axles and suspension, all axles hydro-mechanically forced-steered
- Air suspension with lift and lower valve
- Tyres: 385/65 R 22.5
- JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Braking system according to EU regulations with EBS-E (2S2M)
- Disc brakes
- 2-inch kingpin
- Electro-hydraulic unit
- Remote steering from the front and rear via cable remote control
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area
- Load gauge for axle load determination, including load diagram
- A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container
Dsdpopkx Eajfx Ahxoku
- 5 pairs of crosswise mounted stake pocket strips in the load area
- Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
- One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right
- Central lubrication system with 2 BEKAMAX pumps (Pico)
- 2 LED reversing lights mounted on the rear panel
- Acoustic warning signal when reversing
- Collision protection left and right on the rear crossmember
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
- HRM metallization (High Resistance Metallisation)
- Single-colour paintwork in RAL 3002 carmine red
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Excerpt from the equipment. Full equipment details available upon request.
- Load area in a double-extendable version with pneumatically operated locking mechanism
- A fixed intermediate table, approx. 250 mm wide, mounted on the central beam
- BPW axles and suspension, all axles hydro-mechanically forced-steered
- Air suspension with lift and lower valve
- Tyres: 385/65 R 22.5
- JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Braking system according to EU regulations with EBS-E (2S2M)
- Disc brakes
- 2-inch kingpin
- Electro-hydraulic unit
- Remote steering from the front and rear via cable remote control
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area
- Load gauge for axle load determination, including load diagram
- A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container
Dsdpopkx Eajfx Ahxoku
- 5 pairs of crosswise mounted stake pocket strips in the load area
- Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
- One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right
- Central lubrication system with 2 BEKAMAX pumps (Pico)
- 2 LED reversing lights mounted on the rear panel
- Acoustic warning signal when reversing
- Collision protection left and right on the rear crossmember
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
- HRM metallization (High Resistance Metallisation)
- Single-colour paintwork in RAL 3002 carmine red
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2003
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 201 8... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด