กึ่งพ่วงพื้นต่ำ

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader 205er

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Sample equipment features. Full specification upon request.

Gooseneck
* With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick

Loading Platform
Loading platform in extendable design
* 5 pairs of fold-out outer lashing rings (LC 5,000 daN)
* 3 pairs of fold-out outer lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering

Landing Gear
* JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load)

Axles
* BPW axles: 2 fixed axles, 2 steering axles, drum brakes
* Air suspension with lift/lower function
* Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually
* Tires: 205/65 R 17.5

Brake System
* Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit

Steel Construction
* Made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)

Paintwork
* First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims in silver

Accessories Included
* 2-inch king pin
* Galvanized front steel bulkhead approx. 400 mm high
* Spare wheel holder in front of bulkhead
Lsdpfx Aou Sd U Ujhuoah
* Yellow-red air couplings on galvanized connector bar front
* 4 wheel chocks with holder at bulkhead
* Bracket at rear of gooseneck for aluminum loading ramps
* Galvanized folding supports under inclined edge of loading platform
* Holder for beacon at rear of trailer
* Yellow reflective tape on sides, extension, and rear in accordance with EU regulations
* Brackets for warning signs with socket on both sides at the gooseneck and rear panel
* TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display
* Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm)
* Galvanized toolbox, integrated in gooseneck slope
* 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container
* Sliding mounting rails for aluminum ramps at rear of vehicle
* 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform
* Galvanized cross bracket under the loading platform
* Galvanized extendable widenings, extendable approx. 230 mm per side
* Lift axle on front axle, controlled via TEBS E according to current axle load and load status
* 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้