กึ่งพ่วงแพลตฟอร์มทำงานFAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
 กึ่งพ่วงแพลตฟอร์มทำงาน
FAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
                                                     ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม                                            
                                            €49,750                                    
            สภาพ        
            ใช้แล้ว                    
            ที่ตั้ง        
                                                Essen                                            

 รูปภาพแสดงให้เห็น            
 แสดงแผนที่            
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
                             ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม                    
                            €49,750                    
- ที่ตั้งผู้ขาย:
-     Heegstraße 6-8, 45356 Essen, เยอรมนี             
 โทร            
รายละเอียดทางเทคนิค
- น้ำหนักบรรทุกสูงสุด:
- 38,390 กก.
- น้ำหนักรวม:
- 48,000 กก.
- การกำหนดค่าของเพลา:
- 3 เพลา
- การลงทะเบียนครั้งแรก:
- 03/2024
- ตรวจสอบครั้งถัดไป (TÜV):
- 03/2026
- ความกว้างทั้งหมด:
- 2,540 มม
- อุปกรณ์:
- เอบีเอส
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A20421315
- หมายเลขอ้างอิง:
- 33271
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 31.10.2568
คำอธิบาย
        You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
Redpfxjxth Adj Ahxech
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
Redpfxjxth Adj Ahxech
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
            หมายเหตุ:        ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด    
ลงทะเบียนตั้งแต่: 2003
ส่งคำขอ
โทรศัพท์ & แฟกซ์
                            +49 201 8... โฆษณา                
            ประกาศของคุณถูกลบเรียบร้อยแล้ว            
            เกิดข้อผิดพลาด            
















