CNC มิลลิ่งและเจาะ 3 แกน

Felder PROFIT H08 16.31

MACHINING CAPABILITIES:
- Height (thickness) of useful Z-axis travel: 225 mm
- Length of useful X-axis milling travel: 3860 mm
- Width of useful Y-axis milling travel: 1930 mm
- Work area:
X = 3090 mm
Y = 1530 mm
Kdsdozcvvrjpfx Afmsn
Z = 85 mm, depending on the clamping system, see machine technical diagrams.
- Maximum travel speeds:
X-axis: 25 m/min
Y-axis: 25 m/min
Z-axis: 15 m/min

MACHINE COMPOSITION:
- Vacuum table with grooved length x width: mm
Grid pattern with 30 x 30 mm grid spacing
Matrix table with fine grid, axis dimensions 30x30 mm (instead of 60x60 mm grid)
- 2 Vacuum pumps 250 m3/h
- Chip evacuation mat
- X-axis movement via pinion and rack, Y & Z-axis movements via screw and sleeves
(high-quality precision linear guides with automatic lubrication)

• Milling/routing unit 10 kW
- Tool holder connection type: HSK F63
- Variable speed 1000–24,000 RPM, controlled by a frequency converter
Rotation direction: right/left
The routing spindle is connected to the Z-axis mounting plate via linear guides and moves along 2 vertical linear guides. The tool clamping is done using an HSK F63 cone. Tool retention is controlled by 3 sensors. This ensures safe operation. The tool clamping cleaning is pneumatic.
Drive: HF 3-phase motor controlled by a frequency converter
Bearing: ceramic
Spindle cooling: by air
- Extraction hood around the perimeter
- On-board tool magazine, 11 positions
- Maximum tool diameter: 100 mm
- Maximum tool height: 153 mm
- Distance between clamping jaws: 110 mm
Please consult the machine configuration for more information on specifications.
• DH 16 4H 2S Drilling unit:
Unit with 12 vertical heads and 4 horizontal heads; 2 slotting saws; 1 in the X direction and 1 in the Y direction
Vertical drilling system with 12 spindles. 7 spindles in the X direction and 5 spindles in the Y direction.
Independent operation of each spindle is possible.
Continuous speed up to 6000 RPM, horizontal drilling system with 4 spindles.
1 double spindle in the X direction, 1 double spindle in the Y direction.
• Control panel:
- Windows PC
- Programs (Software):
F4 Design, F4 Nest

OTHER FEATURES:
- Total electrical supply: 400V. 3Ph.+N+T 50Hz IN 56-63 A
- Installed power: 26kW
- Pneumatic supply: 8 Bars
- Average consumption: 350 Nl/min
- Centralized extraction ports
- CE standard marking
Lockable disconnector switch, emergency stops

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้