รถกึ่งพ่วงพร้อมพื้นเรียบและผ้าใบกันน้ำFLIEGL
SDS 390 Gardine Standard Ultralight Coil
รถกึ่งพ่วงพร้อมพื้นเรียบและผ้าใบกันน้ำ
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€24,990
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Triptis 

ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- รถกึ่งพ่วงพร้อมพื้นเรียบและผ้าใบกันน้ำ
- ผู้ผลิต:
- FLIEGL
- หมายเลขเครื่องจักร:
- WFDFLT33902029406
- สภาพ:
- ใช้แล้ว
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
EXW ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€24,990
- ที่ตั้ง:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

โทร
รายละเอียดทางเทคนิค
- น้ำหนักเปล่า:
- 5,800 กก.
- น้ำหนักบรรทุกสูงสุด:
- 29,200 กก.
- น้ำหนักรวม:
- 35,000 กก.
- การกำหนดค่าของเพลา:
- 3 เพลา
- การลงทะเบียนครั้งแรก:
- 12/2021
- ตรวจสอบครั้งถัดไป (TÜV):
- 06/2027
- ความยาวพื้นที่บรรทุก:
- 13,650 มม
- ความกว้างของพื้นที่บรรทุก:
- 2,480 มม
- ความสูงพื้นที่บรรทุกสินค้า:
- 2,790 มม
- ช่วงล่าง:
- อากาศ
- ขนาดยาง:
- 385/65 R22.5"
- สี:
- เงิน
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A19083991
- หมายเลขอ้างอิง:
- 59340
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 06.06.2569
คำอธิบาย
The images are archive images; the vehicle may still be in use.
Chassis, semi-trailer, transport company
Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219,
2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension,
without lift axle.
Hfodpfxowhp A Ds Agpeh
The images are archive images; the vehicle may still be in use.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Chassis, semi-trailer, transport company
Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219,
2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension,
without lift axle.
Hfodpfxowhp A Ds Agpeh
The images are archive images; the vehicle may still be in use.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2006
190 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 36482... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด


















