เครื่องพิมพ์ออฟเซ็ท 2-C ไอแอลกอฮอล์Hashimoto (Japan)
Impulse F-522
เครื่องพิมพ์ออฟเซ็ท 2-C ไอแอลกอฮอล์
Hashimoto (Japan)
Impulse F-522
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€5,500
สภาพ
ใช้แล้ว
ที่ตั้ง
Son 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- เครื่องพิมพ์ออฟเซ็ท 2-C ไอแอลกอฮอล์
- ผู้ผลิต:
- Hashimoto (Japan)
- รุ่น:
- Impulse F-522
- สภาพ:
- ใช้แล้ว
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€5,500
- ที่ตั้ง:
- Ekkersrijt 3106, 5692 CC Son en Breugel, NL
โทร
การขายเครื่องจักร

พบเครื่องจักรใหม่แล้วหรือยัง? เปลี่ยนของเก่าเป็นเงินสดตอนนี้เลย
รับราคาที่ดีที่สุดผ่าน Machineseeker
ข้อมูลเพิ่มเติมเกี่ยวกับการขายเครื่องจักร
ข้อมูลเพิ่มเติมเกี่ยวกับการขายเครื่องจักร
รายละเอียดทางเทคนิค
- ช่องสี:
- 2 kleuren rechtdoor
- น้ำหนักกระดาษ (ต่ำสุด):
- 30 กรัม/ตร.ม.
- น้ำหนักกระดาษ (สูงสุด):
- 350 กรัม/ตร.ม.
- ความกว้างของกระดาษ (ขั้นต่ำ):
- 148 มม
- ความกว้างกระดาษ (สูงสุด):
- 520 มม
- ความสูงของกระดาษ (น้อยสุด):
- 100 มม
- ความสูงกระดาษ (สูงสุด):
- 365 มม
- ความยาวทั้งหมด:
- 2,765 มม
- ความกว้างทั้งหมด:
- 1,523 มม
- ความสูงรวม:
- 1,560 มม
- ข้อกำหนดพื้นที่ ความยาว:
- 2,765 มม
- ความกว้างที่ต้องการ:
- 1,523 มม
- ความสูงที่ต้องการ:
- 1,560 มม
- ประเภทกระแสไฟฟ้าที่เข้ามา:
- สามเฟส
- กระแสไฟฟ้าขาเข้า:
- 20 A
- แรงดันไฟฟ้าขาเข้า:
- 200 V
- อุปกรณ์:
- เอกสารประกอบ / คู่มือ
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A18728896
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 15.03.2568
คำอธิบาย
2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication.
B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely
Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then.
We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL.
Any type of inspection is of course allowed.
We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears.
The rubber rollers are vitrified and need to be replaced.
The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion.
Some specs, for all specs open the PDF at the bottom of this page.
Maximum printing speed 12,000 sheets per hour
Maximum paper size 365 x 520 mm
Minimum paper size 100 x 148 mm or 148 x 100 mm
Maximum printing surface 350 x 510 mm
Rubber cloth size 500 x 520 x 1.9 mm
Plate size 400 - 410 x 510 mm
Dampening rollers in this case of film dampening is 1 (62mm)
Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm
Inlay stack height maximum 850 mm
Explanation stack height max 360 mm
Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC
Power consumption in total 7kW
Csdpfx Asv Nv Taegljrh
Primary fuse in any case 20A
Dimensions LxWxH = 2765 x 1523 x 1560 mm
Net weight 4000 kg
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely
Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then.
We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL.
Any type of inspection is of course allowed.
We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears.
The rubber rollers are vitrified and need to be replaced.
The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion.
Some specs, for all specs open the PDF at the bottom of this page.
Maximum printing speed 12,000 sheets per hour
Maximum paper size 365 x 520 mm
Minimum paper size 100 x 148 mm or 148 x 100 mm
Maximum printing surface 350 x 510 mm
Rubber cloth size 500 x 520 x 1.9 mm
Plate size 400 - 410 x 510 mm
Dampening rollers in this case of film dampening is 1 (62mm)
Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm
Inlay stack height maximum 850 mm
Explanation stack height max 360 mm
Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC
Power consumption in total 7kW
Csdpfx Asv Nv Taegljrh
Primary fuse in any case 20A
Dimensions LxWxH = 2765 x 1523 x 1560 mm
Net weight 4000 kg
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
เอกสาร
18728896-01.pdf (PDF)ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+31 499 2... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด