ศูนย์เครื่องจักรกลซีเอ็นซี

Holz-Her Dynestic 7532 10.5 automatic

Used machine
Year of construction: 2019

Equipment and technical data:
- Designed for classic nesting processing with wear plate
- Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles
- Gantry design traveling column
- Helical rack and pinion drive in X and Y directions; ball screw drive in Z direction for precise positioning
- Processing dimensions:
- Max. support area on nesting table:
X = 3100 mm Y = 1560 mm
- Max. traverse paths:
X = 4695 mm Y = 2100 mm Z = 293 mm
- Max. clearance height over DYNESTIC table:
Z = 100 mm from table top (without wear plate)
- Maximum programmable speed:
Vector speed: 128 m/min
X = 80 m/min Y = 100 m/min Z = 25 m/min
- DYNESTIC table:
- Fixed, continuous processing table with grid layout
- Continuous grooves in X and Y direction
- Groove spacing: 50 mm
- Includes 25 meters sealing cord for clamping the wear plate
- Vacuum zones: single-circuit vacuum system
- Drilling unit 7877:
- 19 spindles
- Drive power: 1.7 kW
- 13 vertical spindles:
- Individually selectable
- U-shaped arrangement
- 5+4 in X and 4 in Y direction
- 32 mm grid
- Max. drill diameter: 35 mm
- Total drill length: 70 mm from mounting end (depends on panel thickness)
- Spindle stroke: 70 mm
- Rotation direction: clockwise/counter-clockwise alternately
- n(max): 1000 - 4400 rpm infinitely variable
- Holder: M10 thread – 11 mm fit
- Without tools and holders
- 6 horizontal spindles:
- 2 double drilling spindles in X direction
Codowkbbdepfx Afdshf
- 1 double drilling spindle in Y direction
- Holder: M10 thread, 11 mm fit
- Max. total drill length: 63 mm from mounting end
- Without tools and holders
- Milling unit 7842:
- Power: 12.0 kW (S6)
- n(max) = 1000 - 24000 rpm infinitely variable
- Max. power at 12000 to 24000 rpm
- Air-cooled
- With HSK-F 63 tool holder
- With right-hand threaded nut (for right-hand rotating tools)
- With collet chuck with HSK shank
- Ceramic ball bearings (hybrid bearings)
- Max. tool weight: 6 kg (including holder)
- Tools: milling and grinding tools max. Ø 160 mm
- Safety guard according to CE standard
- Safety fencing at sides and rear
- Vacuum pump: 500 m³/h, dry-running
- Personnel safety via light barriers in the front machine area
- Handheld control unit for remote operation with the following functions:
- Start/Stop machining program
- Speed control for machining cycles
- Reset button
- Manual feed/rapid traverse for all axes
- EMERGENCY STOP
- CAMPUS V7 CAD/CAM software 1x machine license comprising:
- CAMPUS NC-HOPS:
- Graphic variant system with dialog programming and CAD/CAM functions for creating part variants with macro technique
- CAMPUS MT-Manager
- CAMPUS Workcenter
- CAMPUS DXF interface
- Automatic central lubrication
- Automatic lubrication at defined intervals
- Additional dust protection by overpressure in each guide carriage
- Simultaneous lubrication for all linear ... (text evidently continues)

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้