Holzma HPP 380/43/43/L เครื่องตัดแผ่นไม้ (ผลิตปี 2007)

Holzma HPP 380/43/43/L

Saw blade overhang 95 mm
Saw carriage feed:
forward 1-130 m/min
Kodpfx Afezuph Do Ejna
reverse constant 130 m/min
Program slider speed:
forward 80 m/min
reverse 80 m/min
(in EU countries forward = 25 m/min)
Automatic pressure beam height control yes
Automatic cutting height control yes
Adjustable pressure beam clamping pressure yes
Adjustable clamping chuck clamping pressure yes
Completely shrouded machine table (saw body) yes
Angle guide device
min. pressing width 0 mm
max. pressing width complete cutting length
Main saw motor 18.0 kW
Scoring saw motor 2.2 kW
Operating voltage 400 V / 50 Hz
Electrical connection value for high-power motor:
18.0 kW = 24 kW
21.0 kW = 27 kW
Working height 920 mm
Paint finish: textured paint gray RDS 240 80 05
Main saw blade 380 x 4.4 x 60 mm
Scoring saw blade 180 x 4.4 - 5.4 x 45 mm
Required air pressure 6 bar
Compressed air consumption 150 NL/min
V at the dust extraction nozzle approx. 26 m/s
Vacuum min. 1200 Pa
Exhaust air volume 4600 m³/h
Dust extraction connection, chip channel 1 piece 200 mm
Dust extraction connection, pressure beam 1 piece 150 mm

HPP 380/43/43
Cutting length 4300 mm
Cutting width (program slider travel) 4250 mm
Roller rail (10-track element) 1 piece
Roller rail (2-track element) 5 pieces
Clamping chucks 7 pieces
of which the first 3 pieces are two-finger,
all others are single-finger
Spacing 75/275/475/1050/1850/2650/3450 mm
measured from the angle ruler to the center
Clamping chuck
2 additional two-finger clamping chucks possible
Pos. 175/375 mm
1 additional single-finger clamping chuck possible
Pos. 650 mm
4 manual trimming stops on clamping chucks
Pos. 75/475/1050/2650 mm
Air cushion table with roller element
2160 x 650 mm 4 pieces
Central blower 1 piece
Nozzle spacing of the air cushion tables 70 x 70 mm

Specifically designed for bending parts.

The lifting device shown in the pictures is not included.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้