KBA40/11000Jansen Maschinen GmbH
KBA40/11000
KBA40/11000
Jansen Maschinen GmbH
KBA40/11000
ปีที่ผลิต
2017
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Rastdorf 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- KBA40/11000
- ผู้ผลิต:
- Jansen Maschinen GmbH
- รุ่น:
- KBA40/11000
- หมายเลขเครื่องจักร:
- 17.018.011
- ปีที่ผลิต:
- 2017
- สภาพ:
- ใช้แล้ว
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
- ที่ตั้ง:
- Rastdorf, เยอรมนี

โทร
รายละเอียดทางเทคนิค
แกนหมุน
ความเร็วแกนหมุน (สูงสุด):
3,000 รอบ/นาที
รายละเอียดกำลัง
แรงดันไฟฟ้าขาเข้า:
380 V
ประเภทกระแสไฟฟ้าที่เข้ามา:
สามเฟส
เอกสารและการรับรอง
เอกสารประกอบ / คู่มือ
วัสดุ/ผลิตภัณฑ์ที่แปรรูปได้
น้ำหนักชิ้นงาน (สูงสุด):
3,500 กก.
ข้อกำหนดของเพลา
ระยะเคลื่อนที่แกน X:
11,000 มม
ระยะเคลื่อนที่แกน Y:
500 มม
ระยะเคลื่อนที่ตามแกน Z:
500 มม
การเคลื่อนที่อย่างรวดเร็วแกน Z:
5 ม./นาที
ความเคลื่อนที่อย่างรวดเร็วแกน X:
20 ม./นาที
การเคลื่อนที่อย่างรวดเร็วแกน Y:
10 ม./นาที
รายละเอียดเพิ่มเติม
ความสามารถในการเจาะ:
40 มม
ความเร็วรอบปรับเปลี่ยนได้แบบไม่จำกัด
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23345423
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 17.11.2569
คำอธิบาย
The CNC drilling machine KBA 40 is a development specifically designed for craft businesses and metalworking companies. Time-consuming measuring, marking, and center-punching are no longer necessary.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Iedpfx As Akrktemijtp
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Iedpfx As Akrktemijtp
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
เอกสาร
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ออนไลน์ล่าสุด: เมื่อวานนี้
ลงทะเบียนตั้งแต่: 2026
2 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 5956 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด














