กึ่งพ่วงแพลตฟอร์มทำงาน

KÖGEL Multi Chassis, verstärkt, Bordwände

Excerpt from the equipment list. Complete equipment available upon request.

Chassis
* Regular ladder frame in lightweight steel construction with continuous cross members
* With extension of the chassis frame, the coupling plate is approximately 8 mm thick
Gsdpfxjzc A Afj Ah Esuc
* Equipped with a 2-inch kingpin according to DIN 74080 / ISO 337

Suspension
* Axle lift mechanism on axle 1
* Three-axle unit SAF INTRADISC
* With disc brakes Ø 430 mm
* ET 120 air suspension with approximately 180 mm of travel

Tires
* Wheels with internal sensors according to UN ECE R141
* 6 x 385/65 R 22.5 UNIROYAL TH 50
* 6 steel rims 22.5 x 11.75
* Offset approximately 120 mm (ET 120)

Chassis components
* Mechanical landing gear with leveling foot, approximately 24 tons lifting capacity
* Single-side operation on the right side in the direction of travel. Storage compartment for: 10 side panels, folding stakes, and rear tailgate, completely closed, protected against spray water, and simultaneously serves as a side protective device.
* 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm
* Installed at the rear, 1x left and 1x right. Braking / air suspension system: EBS system 2S/2M with stability program (includes ABS/ALB function). EBS connector ISO 7638, (without connecting cables). Parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector. WABCO EBS system. Air suspension system including 1 lifting and lowering valve, mounted on the left side in the direction of travel behind the axle unit. Driving position is automatically engaged. 2 tamper-proof coupling heads at the front ISO 1728. Air tanks for braking system and air supply made of steel (EN 286-2). Floor: Plate floor approximately 30 mm thick, multi-layer glued plywood. Floor sealed around the perimeter. Stake pockets for square tube inserts approximately 80 x 80 mm. Storage for max. 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the inner front wall. Front wall: Storage for max. 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the inner front wall, approximately 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used to secure the load, if the vehicle is operated without side panels and a rear tailgate. Rear wall: Folding rear wall approximately 600 mm made of aluminum hollow profiles with 3 tensioning bars and T-handle locks. 2 folding steps on the inside. Folding steel corner posts at the rear at the height of the side panels. Side wall: 4 pairs of folding stakes at the height of the side panels. VarioFix steel hollow-profile outer frame. 4 pairs of stake holders for folding stakes on the outer frame (evenly distributed). 24 pairs of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approximately 5,000 kg per ring. Side panels: 5 pairs of folding side panels approximately 600 mm made of aluminum hollow profiles with tensioning bars. Electrical / Electronic: Light bar made of steel, arranged above the under-run protection. KÖGEL LUXIMA Premium Package, consisting of: LED license plate light, LED side marker lights and reflectors at the front, flashing LED side marker lights, Supers

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้