แท่นทดสอบสำหรับไดสตาร์ท-เจนเนอเรเตอร์แบบสายพาน 48V

Kübrich Komponentenprüfstand

Kübrich
Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench
Gkodpfx Acjzhkb Ssijc
Details of the test bench: (See Figure 13)
Frame with
(1) Mounting device for a belt starter generator
(2) Load machine
(3) Belt
(4) MP1: Control cabinet
(5) MP3: Control cabinet for control, interface panel with main switch, I/O
(6) MP2: Control cabinet with Simotion
(7) MP4: Control cabinet with DC-DC converter
(8) H3: Measuring technology box
(9) H4: Interface box
Intended use:
The test bench is used for conducting tests on belt starter generators during development.
Technical data:
Electrical connection data
Power supply: 400 V / 32 A
Battery simulation: 0 - 60 V
Current: 0 - 250 A (continuous)
Current: 330 A (briefly, less than 1 s)
Control voltage: 24 V
Mechanical performance data according to the data sheet of the load machine
Note that a gear ratio of 1:2 to the test specimen shaft must be observed.
Rotational speeds:
Load machine:
Manual operation: 0 - 50 1/min
Automatic operation: 0 - 10,000 1/min
Test specimen motor:
Manual operation: 0 - 100 1/min
Automatic operation: 0 - 20,000 1/min
Dimensions and weight
Width: 850 mm Height: 1386 mm Length: 1687 mm
Weight: approx. 1.2 t
Condition: used
Scope of supply: (See Figure)
(Changes and errors in the technical data and details are subject to change!)
We will gladly answer any further questions you may have by telephone.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้