เครื่องฉีดขึ้นรูปKraussMaffei
EX 80-380 vollelektrisch/full electrical
เครื่องฉีดขึ้นรูป
KraussMaffei
EX 80-380 vollelektrisch/full electrical
ปีที่ผลิต
2009
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Hannover 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- เครื่องฉีดขึ้นรูป
- ผู้ผลิต:
- KraussMaffei
- ปีที่ผลิต:
- 2009
- สภาพ:
- สภาพดีมาก (มือสอง)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
- ชั่วโมงการทำงาน:
- 35,808 h
ราคาและสถานที่
- ที่ตั้ง:
- 30 Hannover, Deutschland

โทร
รายละเอียดทางเทคนิค
เครื่องยนต์และกระปุกเกียร์
ปริมาตรกระบอกสูบ:
204 ซม.³
รายละเอียดเพิ่มเติม
แรงหนีบ:
800 กิโลนิวตัน
แรงดันการฉีด:
1,860 แท่ง
น้ำหนักฉีด:
186 g
เส้นผ่านศูนย์กลางสกรู:
40 มม
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A21434367
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 21.10.2569
คำอธิบาย
Here, as a dealer of injection molding machines, we offer the following well-maintained, used injection molding machine:
We also purchase well-maintained injection molding machines manufactured from 2010 onwards.
We have been a wholesale supplier of injection molding machines for over 25 years.
Manufacturer: KraussMaffei
Type: KM EX 80-380 (fully electric)
Serial Number: 61013142
Year of Manufacture: 2009
Operating Hours: 35,808 h
Control System: MC 5
Fully functional
Condition: very well maintained
Machine comes from a German original owner
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Needle-gate nozzle, pneumatically operated
- Pneumatic valve 1 on back wall adapter plate (BWAP)
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Defect sorting chute
- Nozzle protection door - mold opening protection door, hinged
- Euromap interface 18 on front wall adapter plate (FWAP)
- Ejector plate, electrically operated on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection molding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- Water manifold, 8-way
- 8 x temperature control points for hot runner
- Extrusion injection circuit with position point control
- 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A
- Signal interface EUROMAP 67 for robot
- Start-up circuit, QS package, cycle time analysis, cycle memory, event log
- BluePOWER package – display of energy consumption
- Graphics analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, cycle setpoint optimization
Hedpjyrd U Ujfx Al Njnw
Main language: German
Injection Unit
Screw diameter: 40 mm
Injection weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping Unit
Clamping force: 80 tons / 800 kN
Tie bar distance: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Maximum distance between platens: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit: fully electric
Warranty
Warranty until first commissioning
- Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe.
Worldwide delivery by container or box is also possible. Organization of customs clearance included.
- The machine was tested before dismantling.
- The machine is in our sole ownership.
- The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power.
For information about the machines we offer and our company:
- We only sell our own machines that we have purchased from current production, from our warehouse in Hanover.
- All offered machines are checked and tested before dismantling.
- We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property.
- All offered machines come from successful companies for which maintenance and care are a matter of course.
- All offered machines can be inspected at our warehouse.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
We also purchase well-maintained injection molding machines manufactured from 2010 onwards.
We have been a wholesale supplier of injection molding machines for over 25 years.
Manufacturer: KraussMaffei
Type: KM EX 80-380 (fully electric)
Serial Number: 61013142
Year of Manufacture: 2009
Operating Hours: 35,808 h
Control System: MC 5
Fully functional
Condition: very well maintained
Machine comes from a German original owner
xxxxx without robot / without temperature control unit xxxxx
Extras:
- Needle-gate nozzle, pneumatically operated
- Pneumatic valve 1 on back wall adapter plate (BWAP)
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner/cold runner
- Defect sorting chute
- Nozzle protection door - mold opening protection door, hinged
- Euromap interface 18 on front wall adapter plate (FWAP)
- Ejector plate, electrically operated on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection molding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- Water manifold, 8-way
- 8 x temperature control points for hot runner
- Extrusion injection circuit with position point control
- 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A
- Signal interface EUROMAP 67 for robot
- Start-up circuit, QS package, cycle time analysis, cycle memory, event log
- BluePOWER package – display of energy consumption
- Graphics analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, cycle setpoint optimization
Hedpjyrd U Ujfx Al Njnw
Main language: German
Injection Unit
Screw diameter: 40 mm
Injection weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping Unit
Clamping force: 80 tons / 800 kN
Tie bar distance: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Maximum distance between platens: 750 mm
Ejector stroke / force: 100 mm / 22 kN
Clamping unit: fully electric
Warranty
Warranty until first commissioning
- Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe.
Worldwide delivery by container or box is also possible. Organization of customs clearance included.
- The machine was tested before dismantling.
- The machine is in our sole ownership.
- The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power.
For information about the machines we offer and our company:
- We only sell our own machines that we have purchased from current production, from our warehouse in Hanover.
- All offered machines are checked and tested before dismantling.
- We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property.
- All offered machines come from successful companies for which maintenance and care are a matter of course.
- All offered machines can be inspected at our warehouse.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
เอกสาร
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Wrocław
8,239 km
เครื่องฉีดขึ้นรูป
BattenfeldHM 60/350 S
BattenfeldHM 60/350 S
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Weißenburg in Bayern
8,694 km
เครื่องฉีดขึ้นรูป
NetstalSynergy 1000-230
NetstalSynergy 1000-230
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Bienne
9,005 km
เครื่องกลึงความแม่นยำสูง
Schaublin180-CCN R-TM
Schaublin180-CCN R-TM
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Burgoberbach
8,716 km
เครื่องฉีดขึ้นรูป
KraussMaffeiKM 130-750CX 61010843
KraussMaffeiKM 130-750CX 61010843
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Hilzingen
8,880 km
บรูเดอเรอร์ BSTA 110
BRUDERERBSTA 110
BRUDERERBSTA 110
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Vaterstetten
8,652 km
เครื่องฉีดขึ้นรูป
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Fuente de Cantos
10,372 km
เครื่องเจียรแบบไม่มีศูนย์กลาง
ESTARTA310
ESTARTA310
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Szigetszentmiklós
8,128 km
เครื่องเจียรทรงกระบอก
PalmaryGU20x40 NC unversal grinding machine
PalmaryGU20x40 NC unversal grinding machine
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Cestona
9,845 km
เครื่องเจียรไร้ศูนย์กลาง
ESTARTA312
ESTARTA312
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Eisingen
8,860 km
เครื่องฉีดขึ้นรูป
ENGELe-motion 310/160T
ENGELe-motion 310/160T
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด

































































































































