เครื่องฉีดขึ้นรูปKraussMaffei
KM 80-220 C2
เครื่องฉีดขึ้นรูป
KraussMaffei
KM 80-220 C2
FCA VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€9,900
ปีที่ผลิต
2004
สภาพ
ใช้แล้ว
ที่ตั้ง
Hannover 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- เครื่องฉีดขึ้นรูป
- ผู้ผลิต:
- KraussMaffei
- รุ่น:
- KM 80-220 C2
- ปีที่ผลิต:
- 2004
- สภาพ:
- สภาพดีมาก (มือสอง)
ราคาและสถานที่
FCA VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€9,900
- ที่ตั้ง:
- Hannover, Deutschland
โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A7060254
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 13.10.2568
คำอธิบาย
Here we offer a very well maintained constantly serviced injection molding machine.
complete maintenance by manufacturer until current
Injection molding machine:
Manufacturer / Type: Krauss-Maffei KM80 220 C2
Serial No.: 61006272
year of construction: 2004
Control system: MC4
Clamping unit
clamping force: 800 kN /80 tons
tie bar distance: 405 x 405 mm
Mold installation height min.: 250 mm
platen distance max.: 750 mm
Clamping platens standard: 610 x 610 mm
ejector stroke: 150 mm
core pull: 1x pcs.
Injection unit
Injection unit / cylinder ø30 mm
Shot weight max. (ø30):: 77g/hp
Injection flow: 73cm³/sec
Spec. injection pressure: 2500 bar
Handling interface: Euromap 12
Inking interface: Yes
Dimensions & Weights
Weight with control cabinet: 3,8 t
Length: 3800 mm
Width (machine only): 1050 mm
Height: 1890 mm
Lasdpfxeh Dr E Ts Ahush
Oil filling: 270 L
Location: Hannover / Lower Saxony
The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer!
The machine available now in our warehouse
free loaded on truck of the buyer or free to the door against freight reimbursement
complete maintenance by manufacturer until current
Injection molding machine:
Manufacturer / Type: Krauss-Maffei KM80 220 C2
Serial No.: 61006272
year of construction: 2004
Control system: MC4
Clamping unit
clamping force: 800 kN /80 tons
tie bar distance: 405 x 405 mm
Mold installation height min.: 250 mm
platen distance max.: 750 mm
Clamping platens standard: 610 x 610 mm
ejector stroke: 150 mm
core pull: 1x pcs.
Injection unit
Injection unit / cylinder ø30 mm
Shot weight max. (ø30):: 77g/hp
Injection flow: 73cm³/sec
Spec. injection pressure: 2500 bar
Handling interface: Euromap 12
Inking interface: Yes
Dimensions & Weights
Weight with control cabinet: 3,8 t
Length: 3800 mm
Width (machine only): 1050 mm
Height: 1890 mm
Lasdpfxeh Dr E Ts Ahush
Oil filling: 270 L
Location: Hannover / Lower Saxony
The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer!
The machine available now in our warehouse
free loaded on truck of the buyer or free to the door against freight reimbursement
ผู้จัดหา
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 5121 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด