เครื่องปิดขอบ Lange Maschinenbau B 70 K

Lange Maschinenbau B 70 K

Used machine

Year of manufacture: 2013

Equipment/features:

- Machine table with 13 running rollers for improved workpiece guidance
- Edge feed, synchronized with the belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with cutter (for cuttable edges)
- Three pressure rollers
- Belt feed motor 0.25 kW; approx. 1250 mm length; feed rate approx. 6.0 m/min; 50 mm wide timing belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment
- Direct glue application to the workpiece: leakproof glue pot with glue supply from below and fast heat-up time after machine stoppage
- Flush trimming unit for front and rear workpiece edges, automatic sensing at the workpiece, pneumatic trimming with a cutter for cuttable edges
- Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 high-performance 0.4 kW high-frequency motors, continuously adjustable from 4000 to 18000 rpm, cutter diameter 70 mm, Z4, radius 2 mm/15°; central extraction connection Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with the belt feed
- Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm
Fjdpoytkiuefx Abmefw
- Rotatable film disc Ø 800 mm

Technical details:

- Minimum workpiece width: approx. 80 mm
- Workpiece thickness: 10 – 50 mm
- Minimum workpiece length: approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation max.: 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating power: 2.7 kW
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Heat-up time: approx. 10 minutes
- Pneumatic connection: 6 bar
- Working height: approx. 880 mm
- Dimensions: approx. 1800 x 700 x 1300 mm (without film disc Ø 800)
- Net weight: approx. 260 kg

Availability: short-term
Location: Flörsheim

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้