เครื่องอัดก้อน

mütek MAP 1200

Refurbished machine
Basic machine starts at 145.000 € net
*Options at additional cost, see below
Rsdpfxe E Dqus Am Ujch

with a full 1 year warranty
one machine is directly available

Technical specifications:
Throughput up to 1200 kg / h depending on the material
(e.g. sawdust with a bulk weight of 150/180 kg / qbm)
Briquette Ø 75 mm
including 2 m press channel
Main motor power 45 kW
Feed screw gear motor 2 x 2.2 kw
Compressor screw 2 x 5.5 kw
Distribution auger 2.2 kw
Hydraulic pump motor 0.37 kW
Total connected load 65 KW
Control panel with plain text display for operating states
and utilization display for main drive and feed screws
PLC control Siemens S7 / 300 with operating hours counter in the control cabinet
Machine hat CE mark
Automatic start / stop function of the machine
Dimensions 3100x860x1800 mm lxwxh
Weight 4500 kg

Optional Equipment – Additional Charges

Temperature Control Unit for the Pressing Tools
For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch.
Ready-wired for connection – mandatory for operation.
Including corresponding control system: €3,990 net

Cut-to-Length Device
For cutting the briquettes to the required length: €5,750 net
Compressed air connection required.

Silo for MAP Series
€19,970 net

Storage silo installed above the machine
Capacity: approx. 6 m³
Robust steel construction with agitator discharge system and level sensor

Conveyor Line / Cooling Section
(Nominal length: 5 × 2 m)
€750 net per 2 metres

Assembly / commissioning (nominal value approx. 2-3 days on site to install one press)
based on effort and upon proof against separate invoice. The following sentences apply:
Service technician/mechatronics technician per assembly and hour of travel: €129.00
Overtime: 25% surcharge
50% surcharge per Saturday and night hour
100% surcharge for every Sunday and public holiday hour
Release per fitter per day: country dependent
Per car, van and driving kilometer: €0.98 / km
Arrival and overnight stay against receipt or flat rate bill at the client's expense.
.
Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate

---
Recognition from the raw material:
- The moisture content must be between a minimum of 6 and a maximum of 18%
- Maximum span 20 mm
- Excessive temperature: temperate room at at least + 5 ° C.
- The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result