เครื่องสับไม้, เครื่องย่อยไม้mütek
MGZ 1030 - 22 kW
เครื่องสับไม้, เครื่องย่อยไม้
mütek
MGZ 1030 - 22 kW
ปีที่ผลิต
2025
สภาพ
ใช้แล้ว
ที่ตั้ง
Neckartailfingen 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- เครื่องสับไม้, เครื่องย่อยไม้
- ผู้ผลิต:
- mütek
- รุ่น:
- MGZ 1030 - 22 kW
- ปีที่ผลิต:
- 2025
- สภาพ:
- เกือบใหม่ (ใช้แล้ว)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
- ชั่วโมงการทำงาน:
- 55 h
ราคาและสถานที่
- ที่ตั้ง:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A20648835
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 01.12.2568
คำอธิบาย
Machine with special rotor
Available immediately
Advantages:
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Visible in the last 2 images.
- Additional blade row + €2,790
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
Iedex Af Rdspfx Afpetb
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Available immediately
Advantages:
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Visible in the last 2 images.
- Additional blade row + €2,790
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
Iedex Af Rdspfx Afpetb
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2005
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 711 5... โฆษณา
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
โฆษณาขนาดเล็ก
Framrach
8,452 km
สกรูลำเลียง
ASCOScrew conveyor with Bunker
ASCOScrew conveyor with Bunker
โฆษณาขนาดเล็ก
Bad Feilnbach
8,644 km
ชั้นวางเท้าแขน
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
โฆษณาขนาดเล็ก
Bitburg
8,986 km
มีดแฮ็กเกอร์
EpperM 40 x 40 konkav
EpperM 40 x 40 konkav
โฆษณาขนาดเล็ก
Klagenfurt am Wörthersee
8,492 km
ปรับปรุงใหม่
UnthaRS 30
UnthaRS 30
โฆษณาขนาดเล็ก
Cegléd
8,071 km
เครื่องอัดเม็ด
Gránit-Mill
Gránit-Mill
โฆษณาขนาดเล็ก
Bad Hönningen
8,917 km
ภาชนะบรรจุสุขาภิบาล
Sanitärcontainer / WC ContainerToilettencontainer
Sanitärcontainer / WC ContainerToilettencontainer
โฆษณาขนาดเล็ก
Đakovo
8,196 km
เครื่องอัดเม็ด
TEKNO UNOTK- 304
TEKNO UNOTK- 304
โฆษณาขนาดเล็ก
Petrovče
8,432 km
เครื่องหั่นไม้
RobustHD 1500/45kW with Z conveyor
RobustHD 1500/45kW with Z conveyor
โฆษณาขนาดเล็ก
Jeleśnia
8,084 km
เครื่องอัดเม็ดไม้
COMAFERK 100
COMAFERK 100
โฆษณาขนาดเล็ก
Neckartailfingen
8,826 km
เครื่องย่อยไม้ เครื่องหั่น เครื่องย่อยไม้
mütekMRZ 830 ECO
mütekMRZ 830 ECO
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด





































































