โรงงานทำลายเอกสาร

mütek MRZ 630 - 18,5 kW

Demonstration machine with approximately 9 operating hours
Another machine, available immediately (ex works Neckartailfingen)

*Options available at an extra charge - see below

Included:
Lsdpfob Ny Eyex Aknorr
+ Profile rotor for higher throughput

We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos.

Motor: 18.5 kW; 400 V - 50 Hz - 3-phase
Knives: 15 pieces, reversible
Option: double knife row + €995 net
Rotor diameter: 260 mm
Control: Siemens S7-1200 PLC
Cutting chamber opening: 630 x 820 mm
Hopper volume: approx. 0.6 m³
Hydraulically actuated slide
Screen mesh size as desired (10 - 40 mm)
Suction nozzle Ø 160 mm
Weight: approx. 1,300 kg
Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% (dry basis)
.
Standard included:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC control
- Automatic star/delta start
- Fast hydraulics
- Auto. OFF when the rotor is idle
- Speed 70-90 RPM for high throughput
- Cycle control to avoid idle times
- Performance-enhancing stepped control of the hydraulic slide
- Pertinax guides for hydraulic slide
- Vibration-damping machine feet
- CE compliant
.
Optional shredder features at an extra charge:

- Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net
- Eco-rings: + €1,980 net
(recommended for more than 20% hardwood)
- Double knife row + €995 net
- Special scraper + €990 net
(recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm)
- Articulating conveyor belt + €8,770 net
Angle: adjustable from 0-60 degrees
Discharge height: approx. 2000 mm
- Automatic overband magnet + €5,980 net
Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content)
- Control for conveyor belt and overband magnet + €2,750 net
(Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net
.
Requirements for the raw material:
- The moisture content (dry basis) must be below 30%
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้