รถเทรลเลอร์เปลี่ยนตู้ได้
Container Krancontainer 6,5 m, Fassi Kran F135,
รถเทรลเลอร์เปลี่ยนตู้ได้
Container Krancontainer 6,5 m, Fassi Kran F135,
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€68,500
ปีที่ผลิต
2025
สภาพ
ใหม่
ที่ตั้ง
Petershagen 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€68,500
- ที่ตั้งผู้ขาย:
- Auf der Tappenau 15, 32469 Petershagen, เยอรมนี
โทร
รายละเอียดทางเทคนิค
- ความกว้างของพื้นที่บรรทุก:
- 2,480 มม
- ความยาวพื้นที่บรรทุก:
- 5,500 มม
- ความสูงพื้นที่บรรทุกสินค้า:
- 500 มม
- อุปกรณ์:
- เครน
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A18441561
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 12.08.2568
คำอธิบาย
Brand new roll-off container with FASSI loading crane
Roll-off container in flatbed design with aluminum side walls
and permanently mounted Fassi loading crane
FASSI loading crane F135AC.0.24:
* 390° slewing range
* All hydraulic cylinders double-acting
* Hard-chrome-plated piston rods
* Electronic overload cut-off device with FX500
* Emergency stop and visual alarm (90% and 100%)
* Including adjustable digital slew limiter
* FASSI FSC stability control including LMB II
* Pressure relief and load-holding valves
* Control block with 4 control valves, operable from both sides
* 5th and 6th control circuits
* Oil cooler type 60/24
* Extendable on both sides, support width 4.37 m, hydraulic support
* Standard color RAL 3020 traffic red - all cylinders painted black
* Load hooks and mounting clamps (short / 500mm)
* Driving position: folded across the direction of travel
* Dead center above the outrigger beam
* Joystick control for 6 functions
Itjdpfxevw Hm Hj Ahusn
* 1 LED work light
* Outriggers can be operated remotely
* 180° hydraulic Elevating support legs
Roll-off container/crane container
Transport platform
Total length 6,500 mm
- According to DIN 30722 Part 1
- Internal dimensions 5,800 mm (5,300 mm x 2,450 mm)
- Crane plate 1,200 x 1,200 x 25 mm S355
- Pre-installed hook holder Ø50 mm
- 5 mm smooth floor
- U-shaped frames 80 x 50 x 4 mm, 500 mm spacing
- UNP-180 end frame
- Perforated side profile
- Greaseable and replaceable run-off rollers, axles
Ø40 mm
- 25 mm aluminum side walls on the sides and rear
SNAPLOCK system (height 800 mm), split in the middle
- WITHOUT tarpaulin hooks
- KINNEGRIP K20 stanchions (center and rear)
foldable/removable )
- Front wall height 1200mm
- Primed inside and out
- Exterior paint in any RAL color (stock item in RAL 9006 Silver)
- Anodized aluminum profiles
- Initial container inspection according to BGI 5005
The mechanical and hydraulic connection to the truck will be carried out upon request! Additional charge!
We are happy to provide further information.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Roll-off container in flatbed design with aluminum side walls
and permanently mounted Fassi loading crane
FASSI loading crane F135AC.0.24:
* 390° slewing range
* All hydraulic cylinders double-acting
* Hard-chrome-plated piston rods
* Electronic overload cut-off device with FX500
* Emergency stop and visual alarm (90% and 100%)
* Including adjustable digital slew limiter
* FASSI FSC stability control including LMB II
* Pressure relief and load-holding valves
* Control block with 4 control valves, operable from both sides
* 5th and 6th control circuits
* Oil cooler type 60/24
* Extendable on both sides, support width 4.37 m, hydraulic support
* Standard color RAL 3020 traffic red - all cylinders painted black
* Load hooks and mounting clamps (short / 500mm)
* Driving position: folded across the direction of travel
* Dead center above the outrigger beam
* Joystick control for 6 functions
Itjdpfxevw Hm Hj Ahusn
* 1 LED work light
* Outriggers can be operated remotely
* 180° hydraulic Elevating support legs
Roll-off container/crane container
Transport platform
Total length 6,500 mm
- According to DIN 30722 Part 1
- Internal dimensions 5,800 mm (5,300 mm x 2,450 mm)
- Crane plate 1,200 x 1,200 x 25 mm S355
- Pre-installed hook holder Ø50 mm
- 5 mm smooth floor
- U-shaped frames 80 x 50 x 4 mm, 500 mm spacing
- UNP-180 end frame
- Perforated side profile
- Greaseable and replaceable run-off rollers, axles
Ø40 mm
- 25 mm aluminum side walls on the sides and rear
SNAPLOCK system (height 800 mm), split in the middle
- WITHOUT tarpaulin hooks
- KINNEGRIP K20 stanchions (center and rear)
foldable/removable )
- Front wall height 1200mm
- Primed inside and out
- Exterior paint in any RAL color (stock item in RAL 9006 Silver)
- Anodized aluminum profiles
- Initial container inspection according to BGI 5005
The mechanical and hydraulic connection to the truck will be carried out upon request! Additional charge!
We are happy to provide further information.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 5704 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด