เครื่องกัดหัวหมุน

Martin T 26

Used machine

Year of manufacture: 2002

Condition: Well-maintained (from a public facility)

Design:

Table size: 1255 x 900 mm
Table height: 900 mm
Table opening: 305/225/160/105/72 mm
Weight: 1150 kg
Spindle speeds: 3000/4500/6000/9000 RPM with belt quick-change device
Indicators: electronic speed display, digital (LED) for spindle height (absolute and relative), as well as for swivel angle; automatic display of the correction value for the milling depth; dual operating hour counter for total and batch runtimes
Milling spindle: electrically swiveling +/- 45, 50° via push button; electric height adjustment with rapid and slow traverse; with steep taper SK 40; collet chuck, quick-change system incl. torque wrench; wear-free, electrically braked; electropneumatic locking via selector switch
Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm at 7.5/9.5 kW
Milling fence: Milling fence made of aluminum, hard-coated with holder for groove plate or guide rails
Handwheel adjustment according to mechanical digital counters, infeed table can be adjusted separately, workpiece diameter max. 250 mm
Extraction: two 120 mm diameter connections
Maintenance: central lubrication via pump, lubrication of the milling spindle via grease metering device
Accessories: milling arbor 30 mm, wrench, torque wrench for collet chuck system, oil press, grease press, ball bearing for infeed ring 62 mm, groove plate, arc milling guard FRS 95 for milling operations on the infeed ring with extraction connection and feed strip

Electrical design: lockable main switch, automatic star-delta start, wear-free electric brake, connection for extraction system control, undervoltage protection; CEE three-phase connection for feed device (5-pin socket)
Hedpfxjzmf Iwo Ai Henp
Emission values: noise levels according to prEN ISO 11202, workpiece diameter 125 mm, Z=2, n=6000 rpm
Workplace emissions:
Idle noise (without extraction): 68.6 dB(A)
Operating noise (with extraction): 84.6 dB(A)
Working on the milling fence - Input side max. 0.34, output side max. 0.28
With slot hood - Input side max. 0.21, output side max. 0.20
Minimum extraction volume for both extraction connections: 24 m³/min at 1000 Pa

Special equipment: Model T26, 5/6 kW (6.8 / 8.2 HP) design with CPS - Type Gamma V guard; equipped with Centrex guard; control panel swiveling with control buttons and digital display for milling spindle swivel and spindle up/down, with relative and absolute measurement display and automatic display of the correction value for milling depth during swiveling; necessary if a feed device is installed to the right of the milling fence.
Milling fence with retractable mechanical digital counter for total adjustment
Integral fence 650 and 500 mm long with extension rod
Support for feed device holder (can be swiveled away) with motorized height adjustment (for machine with control panel)
Milling arbor SK 40, 30 mm diameter, clamping length 140 mm (200 mm tool diameter)

Availability: Short-term
Location: Flörsheim

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้