ระบบติดตั้งแบบกด

MDS Autoriv Handarbeitsplatz A220-PD

MDS
Type: MDS A220-PD
MDS A220-PD Manual Assembly Station
The A220-PD assembly system is a stationary manual assembly station for processing press-fit components.
Intended use:
The machine is used for press-fitting connecting elements.
The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine.
The operator then starts the press-fitting process using a foot switch.
The press-fitting process runs automatically.
Connecting elements:
Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin
Thread size: M5, M6, M8, M10, M12
Technical data:
Control voltage: 230V/10A
Connection plug: HAN 10, not wired
Bsdozgr I Rjpfx An Tedd
Temperature ranges:
Transport: -20°C to +60°C
Operation: +10°C to +40°C
Storage: -20°C to +50°C
Compressed air connection:
Operating pressure: 6 bar
Quality: Treated, water-free, and oil-free air
Connection: 1/2" connection thread
Machine dimensions:
Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm
Values apply to a working height (AH) of 1000 mm.
Pneumatics:
Standard: Manufacturer SMC
Variant: Manufacturer FESTO
Control:
Standard: Manufacturer B & R
Variant: Manufacturer Siemens
Machine type: C-frame A220-PD
Continuous sound pressure level (LpA): 78 dB
Operating modes:
The operating modes can be changed in the control panel.
Automatic mode:
The press-fitting of the connecting elements takes place in automatic mode.
Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process.
Manual mode:
In manual mode, adjustments are made to the machine.
In this operating mode, movements can be activated individually.
Weight: Approx. 600 kg
Condition: used
Scope of supply: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้