เครื่องอัดก้อนNestro
NBP C 150
เครื่องอัดก้อน
Nestro
NBP C 150
ปีที่ผลิต
2019
สภาพ
ใช้แล้ว
ที่ตั้ง
เยอรมนี 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
- ที่ตั้ง:
- D - Hessen

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A19798295
- หมายเลขอ้างอิง:
- ISS20250819-5453
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 20.08.2568
คำอธิบาย
Used machine
Identical in construction to Weima C 150
Year of manufacture: 2019
1845 operating hours
Equipment and technical data:
Drive power: 5.5 kW
Briquette diameter: 50 mm
Hydraulic oil capacity: 160 l
Throughput capacity: up to 50 kg/h (depending on material)
Connection rating: 400 V +/- 5% / 50 Hz
Includes:
Press mechanism with filling cylinder, main cylinder, clamping cylinder
Connection part for transport line
Chromed clamp
Hydraulic tank 160 l with pump motor + valve control
Safety switch for oil temperature
Control cabinet and electrical control system
Briquette length monitoring
Automatic end position for all cylinders
Manual control
Automatic "On/Off" with level limit switch
Material: shavings, sawdust from solid wood, loose, clean and free from contaminants*
Maximum dimensions: 10 mm
Throughput performance: approx. 50 m³/year/
* Contaminant specification: Everything except wood, wood pieces larger than 15 mm.
The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics!
Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer.
With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler.
In case of heat build-up, operating time may be drastically reduced due to increased temperature.
With new press clamp
Iedpfx Asw Rhk Dohuotn
Availability: by arrangement
Location: Flörsheim
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Identical in construction to Weima C 150
Year of manufacture: 2019
1845 operating hours
Equipment and technical data:
Drive power: 5.5 kW
Briquette diameter: 50 mm
Hydraulic oil capacity: 160 l
Throughput capacity: up to 50 kg/h (depending on material)
Connection rating: 400 V +/- 5% / 50 Hz
Includes:
Press mechanism with filling cylinder, main cylinder, clamping cylinder
Connection part for transport line
Chromed clamp
Hydraulic tank 160 l with pump motor + valve control
Safety switch for oil temperature
Control cabinet and electrical control system
Briquette length monitoring
Automatic end position for all cylinders
Manual control
Automatic "On/Off" with level limit switch
Material: shavings, sawdust from solid wood, loose, clean and free from contaminants*
Maximum dimensions: 10 mm
Throughput performance: approx. 50 m³/year/
* Contaminant specification: Everything except wood, wood pieces larger than 15 mm.
The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics!
Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer.
With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler.
In case of heat build-up, operating time may be drastically reduced due to increased temperature.
With new press clamp
Iedpfx Asw Rhk Dohuotn
Availability: by arrangement
Location: Flörsheim
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2008
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 6146 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด













