EDM machine

OPS Ingersoll GANTRY EAGLE 500 Generalüberholt

Fully refurbished OPS Ingersoll Gantry 500 Wire EDM Machine – in top technical and visual condition

The machine underwent a comprehensive and professional overhaul in our facility and is in very good condition both technically and visually.

During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric survey, alignment, and additional check using a laser measuring system were performed.

The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced.

In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition.

The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation.

Finally, the machine underwent an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll.

The machine is ready for immediate use and is ideal for reliable production operations.

Technical data:
Ingersoll (OPS Ingersoll)
Wire EDM Machine
OPS INGERSOLL GANTRY EAGLE 500
Year of manufacture: 2009
Control system:
EAGLE Powertec PC/NC 2060
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn quick programming
Powertec Handheld - multifunctional handheld device
Manual erosion with Powertec Handheld
High-speed jump max. 18 m/min
Generator power 60 Amps, EAGLE Powertec
Travel ranges (X, Y, Z): 525 x 400 x 450 mm
Electrode changer: 20-position pick-up plate changer
Work tank (W x D x H): 770 x 670 x 440 mm
Work table (W x D): 750 x 650 mm
Load capacity: 1,000 kg
Accessories:
CO2 fire extinguishing system
Integrated cartridge filter system

Special equipment:
Dwodpfxjyzw I Ij Amvod
Linear measuring system in all axes (Z as standard)

16.10.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้