ผู้วิดน้ำPaal - Kadant
Pacomat 1S
ผู้วิดน้ำ
Paal - Kadant
Pacomat 1S
EXW VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€21,500
ปีที่ผลิต
1990
สภาพ
ใช้แล้ว
ที่ตั้ง
Langenfeld (Rheinland) 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- ผู้วิดน้ำ
- ผู้ผลิต:
- Paal - Kadant
- รุ่น:
- Pacomat 1S
- หมายเลขเครื่องจักร:
- 25038
- ปีที่ผลิต:
- 1990
- สภาพ:
- ใช้แล้ว
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
EXW VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€21,500
- ที่ตั้ง:
- Langenfeld (Rheinland), เยอรมนี
โทร
รายละเอียดทางเทคนิค
- ความกว้างของช่องเติม:
- 650 มม
- ความยาวช่องเติม:
- 800 มม
- ความยาวของก้อนฟ่อนฟาง:
- 1,200 มม
- ความกว้างของก้อนฟาง:
- 700 มม
- ความสูงก้อนฟาง:
- 1,000 มม
- น้ำหนักฟางก้อน:
- 700 กก.
- ความกว้างทั้งหมด:
- 4,270 มม
- ความสูงรวม:
- 2,000 มม
- ความยาวทั้งหมด:
- 5,550 มม
- ประเภทกระแสไฟฟ้าที่เข้ามา:
- เครื่องปรับอากาศ
- แรงดันไฟฟ้าขาเข้า:
- 380 V
- ฟิวส์ไฟฟ้า:
- 75 A
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A19142711
- หมายเลขอ้างอิง:
- Paal's-Presse, blau
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 14.05.2568
คำอธิบาย
Type: Paal Pacomat 1S, built in 1990 (including dust extraction)
Negotiable price: upon request - after inspection
Availability: immediately, the press has been professionally dismantled and stored off-site
Kdjdpfx Ahewkhb Djueu
Location: Langenfeld / Rhineland (area: Düsseldorf / Cologne)
The space required for the press is approximately 8 m x 6 m, height approximately 5 m (as we had it set up, see pictures below).
If the dust extraction system is not installed, approximately 2 m can be saved in width. 8 m remains.
The bales measure 80 x 80 cm, and the length is adjustable. The wire binding is automatic.
We had bales approximately 100 - 120 cm long and weighed approximately 700 kg.
The system was located in a printing plant (now closed) and was mostly used in one (few) shifts, and therefore has a low operating hourly rate. (Unfortunately, we don't have exact details, as the press is located out of the factory.)
The press is equipped with an automatic twisting system, a dust extraction system from Höcker-Polytechnik, and a piping system.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Negotiable price: upon request - after inspection
Availability: immediately, the press has been professionally dismantled and stored off-site
Kdjdpfx Ahewkhb Djueu
Location: Langenfeld / Rhineland (area: Düsseldorf / Cologne)
The space required for the press is approximately 8 m x 6 m, height approximately 5 m (as we had it set up, see pictures below).
If the dust extraction system is not installed, approximately 2 m can be saved in width. 8 m remains.
The bales measure 80 x 80 cm, and the length is adjustable. The wire binding is automatic.
We had bales approximately 100 - 120 cm long and weighed approximately 700 kg.
The system was located in a printing plant (now closed) and was mostly used in one (few) shifts, and therefore has a low operating hourly rate. (Unfortunately, we don't have exact details, as the press is located out of the factory.)
The press is equipped with an automatic twisting system, a dust extraction system from Höcker-Polytechnik, and a piping system.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
เอกสาร
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2016
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 2103 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด