ห้องโรยอัตโนมัติพร้อม dryinROMER / Myjnie automatyczne
Automat
ห้องโรยอัตโนมัติพร้อม dryin
ROMER / Myjnie automatyczne
Automat
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€35,000
ปีที่ผลิต
2020
สภาพ
ใหม่
ที่ตั้ง
Skarżysko-Kamienna 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- ห้องโรยอัตโนมัติพร้อม dryin
- ผู้ผลิต:
- ROMER / Myjnie automatyczne
- รุ่น:
- Automat
- ปีที่ผลิต:
- 2020
- สภาพ:
- ใหม่
ราคาและสถานที่
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€35,000
- ที่ตั้ง:
- ul. Rejowska 99, 26-110 Skarżysko-Kamienna, PL
โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A4881333
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 17.05.2567
คำอธิบาย
Description
Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process.
Gedefy T Szspfx Ahusuh
The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing.
This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters.
Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process.
The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc.
Each tank has its own unique icon and name, enabling the operator to work intuitively.
Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle.
• Control installed on the swivel arm for better access
• PLC microprocessor control
• 7 "touch operator panel
• Very large number of nozzles, compared to other solutions
• (Option) The possibility of drying details after the washing process
• The ability to create your own advanced programs
• Advanced damper system made of acid-resistant sheet metal, double protected by limit switches
• Tight closing and full flap opening control system
• To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment
• Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible
• Fully automatic operation/
Prices are given in the catalog
Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process.
Gedefy T Szspfx Ahusuh
The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing.
This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters.
Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process.
The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc.
Each tank has its own unique icon and name, enabling the operator to work intuitively.
Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle.
• Control installed on the swivel arm for better access
• PLC microprocessor control
• 7 "touch operator panel
• Very large number of nozzles, compared to other solutions
• (Option) The possibility of drying details after the washing process
• The ability to create your own advanced programs
• Advanced damper system made of acid-resistant sheet metal, double protected by limit switches
• Tight closing and full flap opening control system
• To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment
• Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible
• Fully automatic operation/
Prices are given in the catalog
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2020
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+48 41 23... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด