เตาอบอบแห้งSAT
เตาอบอบแห้ง
SAT
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€15,000
ปีที่ผลิต
2014
สภาพ
ใช้แล้ว
ที่ตั้ง
Bron 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- เตาอบอบแห้ง
- ผู้ผลิต:
- SAT
- ปีที่ผลิต:
- 2014
- สภาพ:
- เกือบใหม่ (ใช้แล้ว)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€15,000
- ที่ตั้ง:
- 35 Ave de la République, 69500 Bron, France

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A20683210
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 05.12.2568
คำอธิบาย
Offer Plan: No. A8 28 441
Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm
Working temperature: 380 to 420°C.
Maximum operating temperature: 450°C / air.
TEMPERATURE HOMOGENEITY
Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm
Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient.
FLOOR
Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer).
ACCESS DOOR TO THE INTERNAL VOLUME
Number of doors: 1
Type: double-leaf, hinged on the right.
DOOR SEAL
Refractory fiber gasket.
VENTILATION
Horizontal air circulation.
Number of units: 2.
Type: centrifugal fan.
Construction: mild steel.
Individual air flow: 6,600 m³/h.
Drive motor: brand A.B.B. or LEROY SOMER.
HEATING
Type: natural gas with combustion gas recirculation.
Total power: 90 kW.
Number of heating zones: 1
Csdpox Dhrmjfx Afdeaa
Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard.
TEMPERATURE CONTROL
Number of controlled zones: 1.
Controller: EUROTHERM microprocessor-based PID controller.
Safety: Torque break safety device.
Relay output for contactor control.
Cabinet equipment includes:
- main switch
- multiposition switches to prevent incorrect operation during start-up
- transformer for control circuits
- fuses for power and control circuits
- contactors for the heating system
- circuit breakers and contactors for motor control
- panel switches
- indicator lights
- control and regulation instruments
- CE marking will be affixed to the machine (subject to compliance with safety instructions)
- A certificate of conformity or incorporation will be supplied by SAT.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm
Working temperature: 380 to 420°C.
Maximum operating temperature: 450°C / air.
TEMPERATURE HOMOGENEITY
Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm
Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient.
FLOOR
Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer).
ACCESS DOOR TO THE INTERNAL VOLUME
Number of doors: 1
Type: double-leaf, hinged on the right.
DOOR SEAL
Refractory fiber gasket.
VENTILATION
Horizontal air circulation.
Number of units: 2.
Type: centrifugal fan.
Construction: mild steel.
Individual air flow: 6,600 m³/h.
Drive motor: brand A.B.B. or LEROY SOMER.
HEATING
Type: natural gas with combustion gas recirculation.
Total power: 90 kW.
Number of heating zones: 1
Csdpox Dhrmjfx Afdeaa
Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard.
TEMPERATURE CONTROL
Number of controlled zones: 1.
Controller: EUROTHERM microprocessor-based PID controller.
Safety: Torque break safety device.
Relay output for contactor control.
Cabinet equipment includes:
- main switch
- multiposition switches to prevent incorrect operation during start-up
- transformer for control circuits
- fuses for power and control circuits
- contactors for the heating system
- circuit breakers and contactors for motor control
- panel switches
- indicator lights
- control and regulation instruments
- CE marking will be affixed to the machine (subject to compliance with safety instructions)
- A certificate of conformity or incorporation will be supplied by SAT.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2017
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+33 6 16 ... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด

