Temperature Cooling Unit (TCU)

Single Easitemp 150/6/45 (Easi150.B)

*Technical standard specification:
Unit type: 6/150
Heating capacity: 6 kW
Cooling capacity: 45 kW
(Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar)
Medium: water up to 150°C
Maximum external volume: 9 ltr at 150°C

*Functional equipment:
- Cooling and filling controlled via solenoid valve
- Automatic filling via cooling water
- Level monitoring by magnetic float switch
- Dirt filter in return flow of circulation and cooling water inflow
- Reversing circuit for leakage stop operation (usable up to system closing temp.)
- Ball valve in flow & return
- Automatic temperature-dependent system closure
- Filling time monitoring and aquatimer
- Adjustable pump overrun
- Adjustable temperature alarm
- Options: Interface cable

- Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block
- Heating control SSR
- Control box IP54
- Interface 20mA TTY; pin assignment Arburg
- Cekon plug 16A

- Corrosion-resistant components (VA,MS)
- Unit mounted on castors, two of them steerable with brake
- Additional temperature fuse for safe shutdown of the heating on heating contactor
- Bypass between flow and return with reduced cross-section


*Pump:
Type: Y2051
Delivery rate (max) 27 ltr/min
Bwjdpfx Asfnvwqecdow
Delivery pressure (max) 4.5 bar
Motor power 0.5 kW
Type of submersible pump / peripheral impeller

*Dimensions/Weights/Colours
Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection)
Weight: approx. 43 kg
Colour: Housing: RAL 7035 light grey
Front door: RAL 5015 sky blue

*Connections:
Circulation medium socket G1/2"
cooling water socket G3/8"

*This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.