เครื่องตัดตำแหน่งที่มีข้อบกพร่อง

STROMAB WS.1

Cutting fixed lengths according to cut lists and cutting out defective sections

Cutting cycle:
Defect trimming via chalk marking
Cutting to fixed lengths,
standard and sequential cutting,
sequential cutting in marking mode.
Infeed material: variable lengths with single piece loading

Kdodsx Da Tvopfx Afmon
WS.1 Through-feed crosscut saw
4 pcs. lower feed rollers
1 pc. loading table, 2 meters, right side, with dual marking table
1 pc. outfeed table, 1 meter, with rear stop
Roller height adjustable manually
12 pcs. luminescent chalk sticks

Cutting capacity:
Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm
Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm

Control system with:
7" color touchscreen
Editing of cutting cycles directly on the machine
Programming options:
- Defect trimming via marking
- Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension
100 storage slots for cut lists
Detection system for the last two pieces to be cut and the following piece
Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional)

Technical specifications:
Feed system adjustable by motor, brushless and with toothed belt
Feed speed 100 m/min
Cutting accuracy +/- 0.8 mm
TCT blade diameter 500 mm
Motor power 7.5 kW
Cutting cycles per minute up to No. 100
Minimum workpiece length 550 mm
Minimum workpiece width 40 mm
Minimum workpiece thickness 15 mm

On request:
ZA295 Additional loading table with dual marking table
ZA110 Outfeed table
ZA058 TCT saw blade Ø 500 mm
ZA296 Motorized adjustment of roller height

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้