เลื่อยตัดแพ็คเกจ, เลื่อยตัดแผ่นงานTA Technology
OBS1300-A
เลื่อยตัดแพ็คเกจ, เลื่อยตัดแผ่นงาน
TA Technology
OBS1300-A
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€95,000
ปีที่ผลิต
2025
สภาพ
ใหม่
ที่ตั้ง
Delfina 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- เลื่อยตัดแพ็คเกจ, เลื่อยตัดแผ่นงาน
- ผู้ผลิต:
- TA Technology
- รุ่น:
- OBS1300-A
- ปีที่ผลิต:
- 2025
- สภาพ:
- ใหม่
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€95,000
- ที่ตั้ง:
- Delfina 20, 98-354 Siemkowice, PL
โทร
รายละเอียดทางเทคนิค
- ความสูงในการตัด (สูงสุด):
- 1,300 มม
- ความกว้างสูงสุดของการตัด:
- 1,300 มม
- น้ำหนักรวม:
- 9,000 กก.
- น้ำหนักชิ้นงาน (สูงสุด):
- 8,000 กก.
- ไดรฟ์เลื่อย:
- 11,000 วัตต์
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A20312575
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 16.10.2568
คำอธิบาย
The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length.
The presented machine is available immediately—viewings are welcome.
Technical specifications:
• Maximum bundle dimensions (width/height): 1300 x 1300 mm
• Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut)
• Additional equipment enables cutting bundles with a minimum length of 600 mm
Isdoxn Rt Uopfx Ahuoih
• Maximum cut-off bundle length: 3000 mm
• Maximum feed bundle length: 6000 mm
• Maximum bundle weight: 8,000 kg
• Cutting accuracy: +/- 2 mm
• Dedicated guide lubrication unit
• GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*)
• STHIL RM404 cutting chain
• 11 kW WEG guide drive motor
• Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy
• Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths
• System of three sets of hydraulic clamps
• Hydraulic system built using PONAR components
• Crosswise infeed conveyor for loading bundles onto the machine
• Intelligent unloading system with crosswise chain conveyor
• Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor
• TA DRIVE geared motors
• HIWIN linear guides with increased load capacity
• YHY Japan bearings
• YASKAWA inverters and servomotor
• 21-inch touchscreen operator panel
• SIEMENS PLC controller (with remote access system)
• Safety system and SICK brand sensors
Warranty:
12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse.
Machine supplied with:
• Operating manual
• Declarations of conformity
• Warranty card
• Electrical diagrams
• Hydraulic diagrams
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
The presented machine is available immediately—viewings are welcome.
Technical specifications:
• Maximum bundle dimensions (width/height): 1300 x 1300 mm
• Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut)
• Additional equipment enables cutting bundles with a minimum length of 600 mm
Isdoxn Rt Uopfx Ahuoih
• Maximum cut-off bundle length: 3000 mm
• Maximum feed bundle length: 6000 mm
• Maximum bundle weight: 8,000 kg
• Cutting accuracy: +/- 2 mm
• Dedicated guide lubrication unit
• GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*)
• STHIL RM404 cutting chain
• 11 kW WEG guide drive motor
• Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy
• Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths
• System of three sets of hydraulic clamps
• Hydraulic system built using PONAR components
• Crosswise infeed conveyor for loading bundles onto the machine
• Intelligent unloading system with crosswise chain conveyor
• Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor
• TA DRIVE geared motors
• HIWIN linear guides with increased load capacity
• YHY Japan bearings
• YASKAWA inverters and servomotor
• 21-inch touchscreen operator panel
• SIEMENS PLC controller (with remote access system)
• Safety system and SICK brand sensors
Warranty:
12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse.
Machine supplied with:
• Operating manual
• Declarations of conformity
• Warranty card
• Electrical diagrams
• Hydraulic diagrams
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+48 783 7... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด