เครื่องเทอร์โมฟอร์ม/เครื่องตุ่ม

Uhlmann UPS4ET

Uhlmann thermoform packaging system
UPS 4 ETX
for processing PVC forming film
and aluminum lidding film
Basic machine in modular technology and
balcony construction, with 12 modules:

- Molding film holder
with 2 pneumatic clamping shafts
for core diameter 76 mm,
max. roll diameter 800 mm
- Cutting and gluing table for shaped film
- Shaped film unwinding, clocked
- 3-zone contact heating:
- 6 heating circuits, individually adjustable
- Simultaneous heating of
min. 3 feeds
- Heating plates during machine stop
automatic opening
- Forming station with 4-column lifting table guide
- Filling section, length 1,360 mm
- Safety flap on the filling section
Cover film unwinding on operating side
with pneumatic expansion shaft
for core diameter 76 mm,
max. roll diameter 300 mm
- Plate sealing station with 4 columns
lifting table guide:
Nodpfxjtndpze Am Uswn
- Integrated overload protection
- Automatic lifting of the upper sealing
sealing tool when the machine stops
- Free module for the installation of an additional
station
- Clamping gripper feed
- Punching station with blister lowering
- Waste cutter with integrated motorized
transport of the punching grid
- Smoothing device
- ET/DT perforating station
- Monitoring of the compressed air supply
with machine stop when the minimum
the minimum value
- Visio Scan
- Electrically interlocked safety doors
- Quick format change due to
- plug-in format parts
- Plug-in connections for cooling water supply
- Main drive with frequency-controlled three-phase motor
geared motor
- Switch cabinet at the rear of the machine,
swivel-mounted
Paccontrol operating control
- 10.4" TFT color display with 640x480 pixel resolution
- Processor 68C030
- OS9 2.9 operating system
- 2 MB SRAM, 2 MB Flash, 16 MB DRAM
- SRAM card reader
- IBM standard membrane keyboard
- Centronics interface for external printer
- PS2 interface for external keyboard
- VGA interface for external monitor
- Serial interface for diagnostic purposes
- Arcnet interface
- 8 serial interfaces for connecting
devices
Integrated shift register ISR
Rejection of individual blister rows,
e.g. overheated film in the heating station,
products in the sealing station, etc.
Machine control:
Memory-programmable sequence control
in modular design:
- B&R - PLC control
- Bus system with modules for CPU, inputs,
outputs, temperature controller, cam controller, etc.
- External program memory


Technical data UPS 4 ETX:

- Number of cycles:
- ET range: min./max. : 15/ 50 T/min.
depending on film quality, feed
and format design

- Format range:
min./max. feed in filling area : 64/226 mm
min./max. film width : 100/300 mm
min./max. punching width : 28/284 mm
max. drawing depth : 12 mm
- Compressed air:
- Inlet pressure: approx. 6 - 8 bar
4 Simtap feeders

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้