เครื่องย่อย - เครื่องตัดแบบโรเตอร์Von der Mehden GmbH
Rewowi 990NZ Quad
เครื่องย่อย - เครื่องตัดแบบโรเตอร์
Von der Mehden GmbH
Rewowi 990NZ Quad
FCA VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€59,000
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Innsbruck-Land 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- เครื่องย่อย - เครื่องตัดแบบโรเตอร์
- ผู้ผลิต:
- Von der Mehden GmbH
- รุ่น:
- Rewowi 990NZ Quad
- สภาพ:
- พร้อมใช้งาน (มือสอง)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
- ชั่วโมงการทำงาน:
- 2,000 h
ราคาและสถานที่
FCA VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€59,000
- ที่ตั้ง:
- Innsbruck-Land, ออสเตรีย

โทร
รายละเอียดทางเทคนิค
ขนาดและน้ำหนัก
น้ำหนักรวม:
4,500 กก.
รายละเอียดกำลัง
แรงดันไฟฟ้าขาเข้า:
400 V
ประเภทกระแสไฟฟ้าที่เข้ามา:
สามเฟส
รายละเอียดเพิ่มเติม
ความยาวโรเตอร์:
1,000 มม
ความกว้างของโรเตอร์:
990 มม
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23349086
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 19.11.2569
คำอธิบาย
The Quad 990 from Von der Mehden GmbH is a slow-speed, four-shaft shredder specifically designed for continuous industrial operation in data privacy-compliant document destruction.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
• Cutting unit opening: 990 x 1000 mm
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
Kede Akv I Tspfx Af Tend
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
• Cutting unit opening: 990 x 1000 mm
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
Kede Akv I Tspfx Af Tend
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ออนไลน์ล่าสุด: สัปดาห์ที่แล้ว
ลงทะเบียนตั้งแต่: 2026
1 โฆษณาออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49+43660... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด












