เครื่องวัดพิกัด

Wenzel Typ LH65

Offered for sale due to upgrade (we require a larger model):

Wenzel LH65 3D Coordinate Measuring Machine with accessories

New metrology software system Quartis R2022-2

Used but in very good condition

Fixed price: EUR 22,500 net, ex-works 95369 Untersteinach, collection only

Payment required before or upon collection

Machine will remain in operation until early April 2026 and demonstrations are possible until then

Technical data:
- Model: LH 65/CNC
- Year of manufacture: 2005
- First commissioning: 04/2006
- Serial number: LH-M064774
- Weight: 1,270 kg
- Permissible workpiece weight: 500 kg
- Regular maintenance and calibration carried out
- Unit operated/located in a climate-controlled measuring room
- Monthly usage: approx. 1 week

Measurement range and accuracy:
- Measuring range (X/Y/Z): 650x750x500 mm
- Usable table area: 1450x850 mm
- Measurement uncertainty according to DIN EN ISO 10360-2 for TP200 probing system
- Measuring accuracy (MPE E): 2.6/1000 + (L/300)
- Temperature range: 20°C +/- 2K, 1.0K/h, 1.0K/m
- Operating temperature: 15°C to 30°C
- Relative humidity: 10% - 70%
- Supply pressure: 6-10 bar, pre-filtered, quality as per ISO 8573-1, Class 4 or better

Equipment:
- CNC control
- Renishaw probing system
- Base plate made of natural hard stone with minor repairs (see photo)
- Horizontal air bearing system LH on measuring table
- Active pneumatic damping (instead of elastomer vibration dampers)

- PC system & software:
Fedpfx Aioyxv Eae Seph
- Upgraded to WM Quartis R2022-2 (new price: EUR 23,740.50)
- 4-channel PCIe interface card
- USB keyboard, black, German layout
- One LED monitor full HD (1080p) – 61 cm, 24”
- Front panel PC Si-Esprimo P757

Accessories:
- Reference ball, diameter 25 mm, ceramic, with M10 mounting
- Small stylus kit M2
- PH10T motorized indexing probe head
- PHC 10-3 Plus control unit for indexing head
- 1x TP200
- 1x SF module
- 1x SCR 200
- Various M2 styli (one piece each diameter 0.5mm, 1.0mm, 2.0mm, 4.0mm)
- M2 rotating swivel joint
- M2 stylus holder, length 19 mm
- 1 hex wrench and 2 pin wrenches
- Stylus holder in case
- PC and controller cart with integrated desk
- HAT-400 hand control panel
- Documentation

All information provided to the best of our knowledge and belief. Subject to change, errors, and prior sale. Sale without warranty.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้