ตัวตั้งเวลาการฉีดตามลำดับ YUDO SIT500YUDO
SIT500 Sequence Injection Timer
ตัวตั้งเวลาการฉีดตามลำดับ YUDO SIT500
YUDO
SIT500 Sequence Injection Timer
สภาพ
ใช้แล้ว
ที่ตั้ง
Trenčianske Stankovce 

ข้อมูลพื้นฐาน
ราคาและสถานที่
- ที่ตั้งผู้ขาย:
- 3011 Sedličná, 913 11 Trenčianske Stankovce, สโลวาเกีย

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23289534
- หมายเลขอ้างอิง:
- 260357
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 05.11.2569
คำอธิบาย
YUDO SIT500 Sequence Injection Timer
1\. Overview & Application
1. Manufacturer: YUDO (South Korea)
2. Model: SIT500 Sequence Injection Timer
Ijdpfj Ah Dz Tox Ap Ieii
3. Manual Version: VER. 4.3 MN SIT500 English
4. Application: Used in injection molding to control the opening and closing timing of hydraulic or pneumatic valve gates on hot runner systems. It helps eliminate weld lines, prevent flashing, and improve part cosmetics and strength.
2\. Technical Specifications
1. Channels/Zones: 2-Zone modular configuration (equipped with Module 1 and Module 2).
2. Power Supply: AC 210–230 V (50/60 Hz).
3. Solenoid Valve Output Voltage: Configurable DC 24V / AC 110V / AC 220V (labeled and set for DC 24V output on this unit).
4. Timer Adjustment Range: 0 to 999 seconds per phase.
5. Interface: Heavy-duty industrial Harting multi-pin connector.
6. Control Modes: Supports MODE A and MODE B timing logic sequences (visual guide on the front panel).
3\. Control Panel Interface
1. DEL / DEL SET: Delay time setting before the valve gate opens.
2. OPEN / OPEN SET: Open duration setting for the valve gate.
3. Signal / Open LEDs: Status indicators for incoming injection signal and active solenoid output.
4. Power Switches: Dedicated toggle switch at the bottom of each module for individual channel control.
1\. Overview & Application
1. Manufacturer: YUDO (South Korea)
2. Model: SIT500 Sequence Injection Timer
Ijdpfj Ah Dz Tox Ap Ieii
3. Manual Version: VER. 4.3 MN SIT500 English
4. Application: Used in injection molding to control the opening and closing timing of hydraulic or pneumatic valve gates on hot runner systems. It helps eliminate weld lines, prevent flashing, and improve part cosmetics and strength.
2\. Technical Specifications
1. Channels/Zones: 2-Zone modular configuration (equipped with Module 1 and Module 2).
2. Power Supply: AC 210–230 V (50/60 Hz).
3. Solenoid Valve Output Voltage: Configurable DC 24V / AC 110V / AC 220V (labeled and set for DC 24V output on this unit).
4. Timer Adjustment Range: 0 to 999 seconds per phase.
5. Interface: Heavy-duty industrial Harting multi-pin connector.
6. Control Modes: Supports MODE A and MODE B timing logic sequences (visual guide on the front panel).
3\. Control Panel Interface
1. DEL / DEL SET: Delay time setting before the valve gate opens.
2. OPEN / OPEN SET: Open duration setting for the valve gate.
3. Signal / Open LEDs: Status indicators for incoming injection signal and active solenoid output.
4. Power Switches: Dedicated toggle switch at the bottom of each module for individual channel control.
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด

